ABS AG10NP (CAS No.None)
- 中文别名
- ABS树脂；丙烯腈-丁二烯-苯乙烯共聚物；ABS塑料；ABS工程塑料
- 英文名称
- Acrylonitrile Butadiene Styrene AG10NP
- 分子式
- C15H17N
- 所属类别
- 塑料橡胶
- 物化性质
- 浅象牙色至微黄色固体，无毒、无味，兼具韧、硬、刚特性。无定形料，吸湿性大，流动性中等。密度1.04~1.06 g/cm³，比重约1.05，重复单元分子量211.3。成型收缩率0.4%~0.7%，成型温度200~240℃，干燥条件80~90℃×2小时。燃烧缓慢，火焰呈黄色，有黑烟，燃烧后软化、烧焦，发出特殊肉桂气味，无熔融滴落现象。分解温度大于270℃。耐水、无机盐、碱和酸类，抗酸碱盐腐蚀能力强，表面硬度高，不溶于大部分醇类和烃类溶剂，易溶于醛、酮、酯及某些氯代烃。组成比例：丙烯腈15%~35%，丁二烯5%~30%，苯乙烯40%~60%。
- 密度
- 1.04~1.06 g/cm³
English description（英文原文，共 2002 字符）
Product Name:Acrylonitrile Butadiene Styrene AG10NP
English Name:Acrylonitrile Butadiene Styrene AG10NP
CAS No.:9003-56-9
Aliases:ABS resin, Acrylonitrile-butadiene-styrene copolymer, ABS plastic, ABS engineering plastic
Molecular Formula:C15H17N
Physical Properties:Light ivory to yellowish solid, non-toxic and odorless, combining toughness, hardness and rigidity. Amorphous material with high moisture absorption and medium fluidity. Density 1.04-1.06 g/cm³, specific gravity approx. 1.05, repeating unit molecular weight 211.3. Mold shrinkage 0.4%-0.7%, molding temperature 200-240°C, drying condition 80-90°C for 2 hours. Burns slowly with a yellow flame and black smoke; the material softens, scorches and emits a characteristic cinnamon odor without dripping. Decomposition temperature above 270°C. Resistant to water, inorganic salts, alkalis and acids, with strong acid/alkali/salt corrosion resistance and high surface hardness; insoluble in most alcohols and hydrocarbon solvents, but readily soluble in aldehydes, ketones, esters and certain chlorinated hydrocarbons. Composition ratio: acrylonitrile 15%-35%, butadiene 5%-30%, styrene 40%-60%.
Uses:ABS resin is one of the largest-volume and most widely used polymers, offering balanced mechanical properties of toughness, hardness and rigidity, excellent impact strength, dimensional stability, electrical properties, wear resistance, chemical resistance and dyeability, as well as good processing and machining performance. It is suitable for injection molding, extrusion or thermoforming, and is widely used in machinery, electrical, textile, automotive and shipbuilding industries, as well as for general mechanical parts, anti-friction and wear-resistant parts, transmission parts and telecommunications parts.
Technical Specifications:
Density: 1.04-1.06 g/cm³
Mold shrinkage: 0.4%-0.7%
Molding temperature: 200-240°C, mold temperature: 50-80°C
Drying condition: 80-90°C for 2 hours
Decomposition temperature: above 270°C
English Name:Acrylonitrile Butadiene Styrene AG10NP
CAS No.:9003-56-9
Aliases:ABS resin, Acrylonitrile-butadiene-styrene copolymer, ABS plastic, ABS engineering plastic
Molecular Formula:C15H17N
Physical Properties:Light ivory to yellowish solid, non-toxic and odorless, combining toughness, hardness and rigidity. Amorphous material with high moisture absorption and medium fluidity. Density 1.04-1.06 g/cm³, specific gravity approx. 1.05, repeating unit molecular weight 211.3. Mold shrinkage 0.4%-0.7%, molding temperature 200-240°C, drying condition 80-90°C for 2 hours. Burns slowly with a yellow flame and black smoke; the material softens, scorches and emits a characteristic cinnamon odor without dripping. Decomposition temperature above 270°C. Resistant to water, inorganic salts, alkalis and acids, with strong acid/alkali/salt corrosion resistance and high surface hardness; insoluble in most alcohols and hydrocarbon solvents, but readily soluble in aldehydes, ketones, esters and certain chlorinated hydrocarbons. Composition ratio: acrylonitrile 15%-35%, butadiene 5%-30%, styrene 40%-60%.
Uses:ABS resin is one of the largest-volume and most widely used polymers, offering balanced mechanical properties of toughness, hardness and rigidity, excellent impact strength, dimensional stability, electrical properties, wear resistance, chemical resistance and dyeability, as well as good processing and machining performance. It is suitable for injection molding, extrusion or thermoforming, and is widely used in machinery, electrical, textile, automotive and shipbuilding industries, as well as for general mechanical parts, anti-friction and wear-resistant parts, transmission parts and telecommunications parts.
Technical Specifications:
Density: 1.04-1.06 g/cm³
Mold shrinkage: 0.4%-0.7%
Molding temperature: 200-240°C, mold temperature: 50-80°C
Drying condition: 80-90°C for 2 hours
Decomposition temperature: above 270°C
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
共有 1 家生产厂家、批发商，
1 条供应报价
，覆盖 1 个省份
掌上化工科技有限公司
执照已核验
| 产品名称 | 纯度 | 包装规格 | 级别 | 价格 | 库存 | 操作 |
|---|---|---|---|---|---|---|
| ABS AG10NP | — | — | 工业级 | 电议 | — | 询价 |
常见问题
- ABS AG10NP的 CAS 号是多少？
- ABS AG10NP的 CAS 号是 None。
- ABS AG10NP的分子式和分子量是什么？
- ABS AG10NP的分子式为 C15H17N。
- ABS AG10NP的英文名称是什么？
- ABS AG10NP的英文名称为 Acrylonitrile Butadiene Styrene AG10NP。
- ABS AG10NP还有哪些别名？
- ABS AG10NP又称 ABS树脂、丙烯腈-丁二烯-苯乙烯共聚物、ABS塑料、ABS工程塑料。
- ABS AG10NP有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条ABS AG10NP供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- ABS AG10NP的供应商主要分布在哪些地区？
- ABS AG10NP的供应商主要分布在 上海市（1 条） 等地。
- ABS AG10NP有哪些级别可选？
- 平台上ABS AG10NP的供应级别包括 工业级。
- ABS AG10NP的报价单位是什么？
- ABS AG10NP的报价单位主要有 千克。
- 哪里可以查到ABS AG10NP的价格？
- 掌上化工ABS AG10NP产品页汇总了各供应商的最新报价与规格，地址：/chemicals/abs-ag10np/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布ABS AG10NP采购需求
