ASA/PC合金 XP4034-1000 (CAS No.None)

Product Name:ASA/PC Alloy XP4034-1000

English Name:ASA/PC Alloy XP4034-1000

Aliases:ASA/PC Plastic Alloy, ASA/PC Blend

Physical Properties:ASA/PC alloy is a thermoplastic engineering plastic modified by blending ASA resin and PC resin. It has a density of approximately 1.15 g/cm³, melt flow rate of 24.0 g/10min (260°C/5.0 kgf), water absorption of 0.25% (24h, 73°F), mold shrinkage of 0.005–0.007 in/in, Rockwell hardness of 110 R, gloss (untextured, 60°) of 94, tensile yield strength of 9000 psi, elongation at break of 25%, flexural yield strength of 12800 psi, flexural modulus of 365000 psi, notched Izod impact strength of 6.0 ft-lb/in (73°F) and 1.5 ft-lb/in (-22°F), instrumented impact total energy of 420 in-lbs (73°F) and 270 in-lbs (-22°F), heat deflection temperature of 220°F (264 psi) and 240°F (66 psi), coefficient of thermal expansion of 4×10^-5 in/in/°F, and thermal conductivity of 0.25 W/m·K.

Uses:ASA/PC alloy combines the weather resistance of ASA with the high impact resistance and heat resistance of PC. It is suitable for automotive interior and exterior parts, electronic appliance housings, outdoor equipment, and mechanical components requiring high impact resistance and weatherability.

Technical Specifications:

Density: 1.15 g/cm³ (ASTM D-792)

Melt flow rate: 24.0 g/10min (260°C/5.0 kgf, ASTM D-1238)

Tensile yield strength: 9000 psi (ASTM D-638)

Notched Izod impact strength: 6.0 ft-lb/in at 73°F (ASTM D-256)

Heat deflection temperature: 220°F at 264 psi (ASTM D-648)