E924F Formolene Formosa E924ND (CAS No.None)
- 物化性质
- 密度范围0.935~0.945 g/cm³，熔点约142℃，分解温度约300℃。不吸水，加工前无需烘干，但可用60℃烘干1小时去除表面浮水。熔体粘度较大，流长比小，制品易带静电吸尘。收缩率约16‰，溢边值0.05mm。
- 密度
- 0.935~0.945 g/cm³
- 熔点
- 142℃
English description（英文原文，共 1085 字符）
Product Name:Formolene Formosa E924ND HDPE
English Name:Formolene Formosa E924ND HDPE
CAS No.:9002-88-4
Aliases:High Density Polyethylene, HDPE, Injection molding grade
Molecular Formula:(C2H4)n
Physical Properties:Density ranges from 0.935 to 0.945 g/cm³, melting point is about 142°C, decomposition temperature is about 300°C. Non-hygroscopic, no drying required before processing, but can be dried at 60°C for 1 hour to remove surface moisture. Melt viscosity is high, flow length ratio is low, and products tend to accumulate static charge and attract dust. Shrinkage is about 16‰, flash value is 0.05 mm.
Uses:Suitable for injection molding to produce thin-walled beverage cups, daily necessities, housings, non-load-bearing components, crates, and turnover boxes; also suitable for extrusion blow molding to produce hollow containers, bottles, small engine fuel tanks, and large storage tanks.
Technical Specifications:
Density: 0.935-0.945 g/cm³
Melt index: 3-8 g/10min
Melting point: 142°C
Decomposition temperature: 300°C
Injection molding temperature: 180°C-230°C
English Name:Formolene Formosa E924ND HDPE
CAS No.:9002-88-4
Aliases:High Density Polyethylene, HDPE, Injection molding grade
Molecular Formula:(C2H4)n
Physical Properties:Density ranges from 0.935 to 0.945 g/cm³, melting point is about 142°C, decomposition temperature is about 300°C. Non-hygroscopic, no drying required before processing, but can be dried at 60°C for 1 hour to remove surface moisture. Melt viscosity is high, flow length ratio is low, and products tend to accumulate static charge and attract dust. Shrinkage is about 16‰, flash value is 0.05 mm.
Uses:Suitable for injection molding to produce thin-walled beverage cups, daily necessities, housings, non-load-bearing components, crates, and turnover boxes; also suitable for extrusion blow molding to produce hollow containers, bottles, small engine fuel tanks, and large storage tanks.
Technical Specifications:
Density: 0.935-0.945 g/cm³
Melt index: 3-8 g/10min
Melting point: 142°C
Decomposition temperature: 300°C
Injection molding temperature: 180°C-230°C
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
共有 1 家生产厂家、批发商，
1 条供应报价
，覆盖 1 个省份
掌上化工科技有限公司
执照已核验
| 产品名称 | 纯度 | 包装规格 | 级别 | 价格 | 库存 | 操作 |
|---|---|---|---|---|---|---|
| E924F Formolene Formosa E… | — | — | 工业级 | 电议 | — | 询价 |
常见问题
- E924F Formolene Formosa E924ND的 CAS 号是多少？
- E924F Formolene Formosa E924ND的 CAS 号是 None。
- E924F Formolene Formosa E924ND的分子式和分子量是什么？
- E924F Formolene Formosa E924ND的分子式为 (C2H4)n。
- E924F Formolene Formosa E924ND的英文名称是什么？
- E924F Formolene Formosa E924ND的英文名称为 Formolene Formosa E924ND HDPE。
- E924F Formolene Formosa E924ND还有哪些别名？
- E924F Formolene Formosa E924ND又称 高密度聚乙烯、HDPE、聚乙烯注塑级。
- E924F Formolene Formosa E924ND有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条E924F Formolene Formosa E924ND供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- E924F Formolene Formosa E924ND的供应商主要分布在哪些地区？
- E924F Formolene Formosa E924ND的供应商主要分布在 上海市（1 条） 等地。
- E924F Formolene Formosa E924ND有哪些级别可选？
- 平台上E924F Formolene Formosa E924ND的供应级别包括 工业级。
- E924F Formolene Formosa E924ND的报价单位是什么？
- E924F Formolene Formosa E924ND的报价单位主要有 千克。
- 哪里可以查到E924F Formolene Formosa E924ND的价格？
- 掌上化工E924F Formolene Formosa E924ND产品页汇总了各供应商的最新报价与规格，地址：/chemicals/e924f-formolene-formosa-e924nd/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布E924F Formolene Formosa E924ND采购需求
