快速变温 (CAS No.None)
- 中文别名
- 高低温湿热交变试验箱；可程式恒温恒湿试验箱；快速温变试验箱；交变湿热试验箱
- 英文名称
- Rapid Temperature Change Test Chamber
- 所属类别
- 试剂实验设备
- 物化性质
- 设备外壳采用优质A3钢板表面喷塑处理，圆弧型设计；内胆为SUS304优质不锈钢板，能恒定控制试验温差±2℃；保温材质为高密度玻璃纤维棉；观察窗采用多层中空钢化玻璃，内侧胶合片式导电膜；湿度采用不锈钢锅炉蒸汽加湿方式，高精度PT100加湿布感应，反应快控制精确；搅拌系统采用长轴风扇电机，使工作室内温湿度均匀稳定；门与箱体之间采用双层耐高温高张性密封条；制冷系统安装在底部，压缩机采用法国泰康全封闭压缩机，制冷剂环保型。
English description（英文原文，共 2296 字符）
Product Name:Rapid Temperature Change Test Chamber (High-Low Temperature Humidity Alternating Test Chamber)
English Name:Rapid Temperature Change Test Chamber
Aliases:High-Low Temperature Humidity Alternating Test Chamber, Programmable Temperature & Humidity Test Chamber, Temperature Cycling Test Chamber, Damp Heat Alternating Test Chamber
Physical Properties:The outer shell is made of high-quality A3 steel plate with plastic-sprayed surface and arc-shaped design; the inner tank is made of SUS304 high-quality stainless steel plate, which can steadily control the test temperature difference within ±2°C. The insulation material is high-density glass fiber cotton. The observation window adopts multi-layer hollow tempered glass with a laminated conductive film on the inner side. Humidity is controlled by stainless steel boiler steam humidification with a high-precision PT100 humidification cloth sensor, providing fast response and accurate control. The stirring system uses a long-shaft fan motor to keep temperature and humidity uniform and stable in the working chamber. Double-layer high-temperature-resistant sealing strips are used between the door and the chamber body. The refrigeration system is installed at the bottom, adopting a hermetic French Tecumseh compressor and environmentally friendly refrigerant.
Uses:It is used to inspect and determine the adaptability of electrical and electronic products or materials during storage and use under alternating temperature and humidity environmental conditions. It is widely applied in artificial simulated environmental tests, and can perform high-temperature, low-temperature, constant damp heat, alternating damp heat and other environmental tests. It meets the requirements of national standards such as GB2423.1-2001, GB2423.2-2001, GB2423.3-93 and GB2423.4-93.
Technical Specifications:
Temperature range: B-type -20°C~130°C (optional A-type 0°C~130°C, C-type -40°C~130°C, D-type -60°C~130°C, E-type -70°C~130°C)
Temperature uniformity ≤2°C (no load), temperature fluctuation ±0.5°C (no load), temperature deviation ≤±2°C
Humidity range: 30%~98% R.H (at 30°C~80°C), humidity deviation +2%~-3% R.H (±5% R.H when humidity is below 75% R.H)
Heating/cooling rate: 1.0°C/min (no load)
Time setting range: 0~999.9 hours
English Name:Rapid Temperature Change Test Chamber
Aliases:High-Low Temperature Humidity Alternating Test Chamber, Programmable Temperature & Humidity Test Chamber, Temperature Cycling Test Chamber, Damp Heat Alternating Test Chamber
Physical Properties:The outer shell is made of high-quality A3 steel plate with plastic-sprayed surface and arc-shaped design; the inner tank is made of SUS304 high-quality stainless steel plate, which can steadily control the test temperature difference within ±2°C. The insulation material is high-density glass fiber cotton. The observation window adopts multi-layer hollow tempered glass with a laminated conductive film on the inner side. Humidity is controlled by stainless steel boiler steam humidification with a high-precision PT100 humidification cloth sensor, providing fast response and accurate control. The stirring system uses a long-shaft fan motor to keep temperature and humidity uniform and stable in the working chamber. Double-layer high-temperature-resistant sealing strips are used between the door and the chamber body. The refrigeration system is installed at the bottom, adopting a hermetic French Tecumseh compressor and environmentally friendly refrigerant.
Uses:It is used to inspect and determine the adaptability of electrical and electronic products or materials during storage and use under alternating temperature and humidity environmental conditions. It is widely applied in artificial simulated environmental tests, and can perform high-temperature, low-temperature, constant damp heat, alternating damp heat and other environmental tests. It meets the requirements of national standards such as GB2423.1-2001, GB2423.2-2001, GB2423.3-93 and GB2423.4-93.
Technical Specifications:
Temperature range: B-type -20°C~130°C (optional A-type 0°C~130°C, C-type -40°C~130°C, D-type -60°C~130°C, E-type -70°C~130°C)
Temperature uniformity ≤2°C (no load), temperature fluctuation ±0.5°C (no load), temperature deviation ≤±2°C
Humidity range: 30%~98% R.H (at 30°C~80°C), humidity deviation +2%~-3% R.H (±5% R.H when humidity is below 75% R.H)
Heating/cooling rate: 1.0°C/min (no load)
Time setting range: 0~999.9 hours
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- 快速变温的 CAS 号是多少？
- 快速变温的 CAS 号是 None。
- 快速变温的英文名称是什么？
- 快速变温的英文名称为 Rapid Temperature Change Test Chamber。
- 快速变温还有哪些别名？
- 快速变温又称 高低温湿热交变试验箱、可程式恒温恒湿试验箱、快速温变试验箱、交变湿热试验箱。
- 快速变温有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条快速变温供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- 快速变温的供应商主要分布在哪些地区？
- 快速变温的供应商主要分布在 上海市（1 条） 等地。
- 快速变温有哪些级别可选？
- 平台上快速变温的供应级别包括 工业级。
- 快速变温的报价单位是什么？
- 快速变温的报价单位主要有 千克。
- 哪里可以查到快速变温的价格？
- 掌上化工快速变温产品页汇总了各供应商的最新报价与规格，地址：/chemicals/kuai-su-bian-wen/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布快速变温采购需求
