Makrolon PC 2407 (CAS No.None)
- 中文别名
- PC 2407；聚碳酸酯 2407；Makrolon 2407；防弹胶
- 英文名称
- Makrolon PC 2407 Polycarbonate Resin
- 分子式
- (C16H14O3)n
- 所属类别
- 塑料橡胶
- 物化性质
- Makrolon PC 2407 为无色透明、无定形聚碳酸酯树脂，密度约 1.19 g/cm³，吸水率约 0.5%，成型收缩率约 0.5%。该牌号经光稳定化处理，具有良好的光稳定性；耐热、耐油、耐稀酸，但不耐强碱和长期紫外光照射。室温下冲击韧性高，尺寸稳定性好，可进行冷压、冷拉等冷成型加工；耐磨性较差，易磨损表面需涂覆或表面处理。
- 技术参数
- 密度约 1.19 g/cm³，吸水率约 0.5%，成型收缩率约 0.5%。 熔体体积流动速率（300°C，1.2 kg）约 19 cm³/10 min。 拉伸屈服应力约 65 MPa，断裂标称应变大于 50%。 维卡软化温度（B120）约 143°C，热变形温度（A法）约 125°C。 不含锑、氯、溴类阻燃剂，阻燃性良好，2.0 mm 厚度下灼热丝可燃性指数约 960°C。
English description（英文原文，共 1743 字符）
Product Name:Makrolon PC 2407 Polycarbonate Resin
English Name:Makrolon PC 2407 Polycarbonate Resin
CAS No.:25037-45-0
Aliases:Makrolon 2407, PC 2407, Bisphenol A polycarbonate
Molecular Formula:(C16H14O3)n
Physical Properties:Makrolon PC 2407 is a colorless transparent, amorphous polycarbonate resin with a density of about 1.19 g/cm³, water absorption of about 0.5%, and mold shrinkage of about 0.5%. This grade is UV-stabilized and shows good light stability; it resists heat, oils and dilute acids, but is not resistant to strong alkalis or prolonged UV exposure. At room temperature it has high impact toughness and good dimensional stability and can be cold-formed by cold pressing or cold drawing. Its abrasion resistance is relatively poor, so surfaces subject to wear should be coated or surface treated.
Uses:Makrolon PC 2407 is a medium-viscosity injection-molding grade polycarbonate used to manufacture transparent engineering parts requiring high impact resistance and dimensional stability, such as electrical and electronic housings, automotive interior and exterior parts, lighting fixtures and optical components. It can also be blended with other polymers to improve melt flow and reduce stress-cracking risk.
Technical Specifications:
Density approx. 1.19 g/cm³, water absorption approx. 0.5%, mold shrinkage approx. 0.5%.
Melt volume-flow rate (300°C, 1.2 kg) approx. 19 cm³/10 min.
Tensile yield stress approx. 65 MPa, nominal strain at break greater than 50%.
Vicat softening temperature (B120) approx. 143°C, heat deflection temperature (A method) approx. 125°C.
Free of antimony, chlorine and bromine flame retardants; good flame retardancy; glow-wire flammability index approx. 960°C at 2.0 mm thickness.
English Name:Makrolon PC 2407 Polycarbonate Resin
CAS No.:25037-45-0
Aliases:Makrolon 2407, PC 2407, Bisphenol A polycarbonate
Molecular Formula:(C16H14O3)n
Physical Properties:Makrolon PC 2407 is a colorless transparent, amorphous polycarbonate resin with a density of about 1.19 g/cm³, water absorption of about 0.5%, and mold shrinkage of about 0.5%. This grade is UV-stabilized and shows good light stability; it resists heat, oils and dilute acids, but is not resistant to strong alkalis or prolonged UV exposure. At room temperature it has high impact toughness and good dimensional stability and can be cold-formed by cold pressing or cold drawing. Its abrasion resistance is relatively poor, so surfaces subject to wear should be coated or surface treated.
Uses:Makrolon PC 2407 is a medium-viscosity injection-molding grade polycarbonate used to manufacture transparent engineering parts requiring high impact resistance and dimensional stability, such as electrical and electronic housings, automotive interior and exterior parts, lighting fixtures and optical components. It can also be blended with other polymers to improve melt flow and reduce stress-cracking risk.
Technical Specifications:
Density approx. 1.19 g/cm³, water absorption approx. 0.5%, mold shrinkage approx. 0.5%.
Melt volume-flow rate (300°C, 1.2 kg) approx. 19 cm³/10 min.
Tensile yield stress approx. 65 MPa, nominal strain at break greater than 50%.
Vicat softening temperature (B120) approx. 143°C, heat deflection temperature (A method) approx. 125°C.
Free of antimony, chlorine and bromine flame retardants; good flame retardancy; glow-wire flammability index approx. 960°C at 2.0 mm thickness.
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- Makrolon PC 2407的 CAS 号是多少？
- Makrolon PC 2407的 CAS 号是 None。
- Makrolon PC 2407的分子式和分子量是什么？
- Makrolon PC 2407的分子式为 (C16H14O3)n。
- Makrolon PC 2407的英文名称是什么？
- Makrolon PC 2407的英文名称为 Makrolon PC 2407 Polycarbonate Resin。
- Makrolon PC 2407还有哪些别名？
- Makrolon PC 2407又称 PC 2407、聚碳酸酯 2407、Makrolon 2407、防弹胶。
- Makrolon PC 2407有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条Makrolon PC 2407供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- Makrolon PC 2407的供应商主要分布在哪些地区？
- Makrolon PC 2407的供应商主要分布在 上海市（1 条） 等地。
- Makrolon PC 2407有哪些级别可选？
- 平台上Makrolon PC 2407的供应级别包括 工业级。
- Makrolon PC 2407的报价单位是什么？
- Makrolon PC 2407的报价单位主要有 千克。
- 哪里可以查到Makrolon PC 2407的价格？
- 掌上化工Makrolon PC 2407产品页汇总了各供应商的最新报价与规格，地址：/chemicals/makrolon-pc-2407-2/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布Makrolon PC 2407采购需求
