PA6 Durethan B29ENSI (CAS No.None)
- 物化性质
- 聚酰胺6（PA6）基热塑性工程塑料，密度约1.12 g/cm³，熔点约220℃，连续使用温度通常为80~150℃。经抗冲击改性，韧性和抗冲击强度显著优于基础PA6；耐水解性能好，适合高温高湿环境；无卤环保配方。具有较高的吸水率，湿态下尺寸稳定性和绝缘性能会有所下降；对多数溶剂、油类和油脂稳定，但耐强酸强碱能力较差。
- 熔点
- 约220℃；连续使用温度：80~150℃
English description（英文原文，共 1717 字符）
Product Name:Durethan B29ENSI (Polyamide 6)
English Name:Durethan B29ENSI (Polyamide 6)
CAS No.:25038-54-8
Aliases:Nylon 6, PA6, Polycaprolactam
Molecular Formula:(C6H11NO)n
Physical Properties:Thermoplastic engineering plastic based on polyamide 6 (PA6), with a density of approximately 1.12 g/cm³, a melting point of approximately 220°C, and a continuous service temperature typically of 80–150°C. It is impact-modified, giving significantly better toughness and impact strength than standard PA6. It exhibits good hydrolysis resistance, making it suitable for high-temperature and high-humidity environments, and uses a halogen-free environmentally friendly formulation. It has relatively high water absorption; dimensional stability and insulation performance may decrease under humid conditions. It is resistant to most solvents, oils, and greases, but has poor resistance to strong acids and alkalis.
Uses:Mainly used for wet-area components in automotive engine compartments, such as thermostat housings, engine sensor housings, coolant pipe connectors and lines, and transmission oil cooler end covers. It is also suitable for electrical/electronic housings, connectors, and other industrial structural parts requiring impact resistance, halogen-free environmental compliance, and hydrolysis resistance.
Technical Specifications:
Base resin: polyamide 6 (PA6), CAS 25038-54-8
Modification system: impact-modified, halogen-free, hydrolysis-stabilized
Melting point: approx. 220°C; continuous service temperature: 80–150°C
Mold shrinkage: higher than reinforced PA6 grades and isotropic; moisture absorption at high humidity can cause dimensional and mechanical property changes
Packaging: 25 kg/bag
English Name:Durethan B29ENSI (Polyamide 6)
CAS No.:25038-54-8
Aliases:Nylon 6, PA6, Polycaprolactam
Molecular Formula:(C6H11NO)n
Physical Properties:Thermoplastic engineering plastic based on polyamide 6 (PA6), with a density of approximately 1.12 g/cm³, a melting point of approximately 220°C, and a continuous service temperature typically of 80–150°C. It is impact-modified, giving significantly better toughness and impact strength than standard PA6. It exhibits good hydrolysis resistance, making it suitable for high-temperature and high-humidity environments, and uses a halogen-free environmentally friendly formulation. It has relatively high water absorption; dimensional stability and insulation performance may decrease under humid conditions. It is resistant to most solvents, oils, and greases, but has poor resistance to strong acids and alkalis.
Uses:Mainly used for wet-area components in automotive engine compartments, such as thermostat housings, engine sensor housings, coolant pipe connectors and lines, and transmission oil cooler end covers. It is also suitable for electrical/electronic housings, connectors, and other industrial structural parts requiring impact resistance, halogen-free environmental compliance, and hydrolysis resistance.
Technical Specifications:
Base resin: polyamide 6 (PA6), CAS 25038-54-8
Modification system: impact-modified, halogen-free, hydrolysis-stabilized
Melting point: approx. 220°C; continuous service temperature: 80–150°C
Mold shrinkage: higher than reinforced PA6 grades and isotropic; moisture absorption at high humidity can cause dimensional and mechanical property changes
Packaging: 25 kg/bag
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- PA6 Durethan B29ENSI的 CAS 号是多少？
- PA6 Durethan B29ENSI的 CAS 号是 None。
- PA6 Durethan B29ENSI的分子式和分子量是什么？
- PA6 Durethan B29ENSI的分子式为 (C6H11NO)n。
- PA6 Durethan B29ENSI的英文名称是什么？
- PA6 Durethan B29ENSI的英文名称为 Durethan B29ENSI (Polyamide 6)。
- PA6 Durethan B29ENSI还有哪些别名？
- PA6 Durethan B29ENSI又称 尼龙6、PA6、聚己内酰胺。
- PA6 Durethan B29ENSI有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条PA6 Durethan B29ENSI供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- PA6 Durethan B29ENSI的供应商主要分布在哪些地区？
- PA6 Durethan B29ENSI的供应商主要分布在 上海市（1 条） 等地。
- PA6 Durethan B29ENSI有哪些级别可选？
- 平台上PA6 Durethan B29ENSI的供应级别包括 工业级。
- PA6 Durethan B29ENSI的报价单位是什么？
- PA6 Durethan B29ENSI的报价单位主要有 千克。
- 哪里可以查到PA6 Durethan B29ENSI的价格？
- 掌上化工PA6 Durethan B29ENSI产品页汇总了各供应商的最新报价与规格，地址：/chemicals/pa6-durethan-b29ensi/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布PA6 Durethan B29ENSI采购需求
