POM M90 共聚甲醛 (CAS No.None)
- 中文别名
- 聚甲醛；聚氧亚甲基；聚缩醛树脂；POM树脂；共聚甲醛树脂
- 英文名称
- Polyoxymethylene Copolymer (POM M90)
- 分子式
- (CH₂O)ₙ
- 所属类别
- 塑料橡胶
- 物化性质
- 共聚甲醛热塑性树脂，密度约1.41 g/cm³，熔体流动速率约9 g/10min。具有高硬度、高强度、高抗耐磨性和优异的耐疲劳性能；耐酸碱及多种溶剂，耐化学药品性良好。尺寸稳定性好，模塑收缩率低，摩擦系数低，电绝缘性能优良。耐温范围约-40℃至100℃，热变形温度约110℃。
- 技术参数
- 熔体流动速率(MFR)约9 g/10min，流动性优异，适合薄壁精密注塑成型 拉伸强度约65 MPa，硬度高，抗磨损性能突出 摩擦系数约0.35，自润滑性好，对金属对磨件磨损率低 模塑收缩率约2.0%，制品尺寸稳定性好，翘曲变形小 热变形温度约110℃，耐疲劳性能优良，可在宽温域下长期使用
English description（英文原文，共 1817 字符）
Product Name:Polyoxymethylene Copolymer (POM M90)
English Name:Polyoxymethylene Copolymer (POM M90)
CAS No.:24969-26-4
Aliases:Polyacetal Resin, Polyoxymethylene Resin, Acetal Copolymer, POM Resin
Molecular Formula:(CH₂O)ₙ
Physical Properties:Thermoplastic acetal copolymer resin with a density of approximately 1.41 g/cm³ and a melt flow rate of about 9 g/10min. It exhibits high hardness, high strength, excellent wear resistance, and outstanding fatigue endurance. Resistant to acids, alkalis, and various solvents with good chemical resistance. Dimensional stability is excellent with low mold shrinkage, low coefficient of friction, and good electrical insulation properties. Service temperature ranges from approximately -40°C to 100°C with a heat deflection temperature of about 110°C.
Uses:Suitable for various components and thin-walled parts in electronic and electrical equipment, such as gears, valve parts, rollers, bearings, and pump components. Used in automotive interior and exterior trim as well as piping systems. Its high flowability and dimensional stability enable the production of precision structural parts, with broad applications in automotive components and electronic/electrical parts.
Technical Specifications:
Melt flow rate (MFR) of approximately 9 g/10min, offering excellent flowability for thin-wall precision injection molding
Tensile strength of approximately 65 MPa with high hardness and outstanding wear resistance
Coefficient of friction of approximately 0.35, providing good self-lubrication and low wear against metal counterparts
Mold shrinkage of approximately 2.0%, ensuring excellent dimensional stability and minimal warpage
Heat deflection temperature of approximately 110°C with excellent fatigue resistance for long-term use over a wide temperature range
English Name:Polyoxymethylene Copolymer (POM M90)
CAS No.:24969-26-4
Aliases:Polyacetal Resin, Polyoxymethylene Resin, Acetal Copolymer, POM Resin
Molecular Formula:(CH₂O)ₙ
Physical Properties:Thermoplastic acetal copolymer resin with a density of approximately 1.41 g/cm³ and a melt flow rate of about 9 g/10min. It exhibits high hardness, high strength, excellent wear resistance, and outstanding fatigue endurance. Resistant to acids, alkalis, and various solvents with good chemical resistance. Dimensional stability is excellent with low mold shrinkage, low coefficient of friction, and good electrical insulation properties. Service temperature ranges from approximately -40°C to 100°C with a heat deflection temperature of about 110°C.
Uses:Suitable for various components and thin-walled parts in electronic and electrical equipment, such as gears, valve parts, rollers, bearings, and pump components. Used in automotive interior and exterior trim as well as piping systems. Its high flowability and dimensional stability enable the production of precision structural parts, with broad applications in automotive components and electronic/electrical parts.
Technical Specifications:
Melt flow rate (MFR) of approximately 9 g/10min, offering excellent flowability for thin-wall precision injection molding
Tensile strength of approximately 65 MPa with high hardness and outstanding wear resistance
Coefficient of friction of approximately 0.35, providing good self-lubrication and low wear against metal counterparts
Mold shrinkage of approximately 2.0%, ensuring excellent dimensional stability and minimal warpage
Heat deflection temperature of approximately 110°C with excellent fatigue resistance for long-term use over a wide temperature range
共 1 家生产厂家、批发商，
1 条供应报价
AI 解读这个产品
AI
AI 生成，仅供参考；价格与规格以供应商报价为准。
供应报价
共有 1 家生产厂家、批发商，
1 条供应报价
，覆盖 1 个省份
掌上化工科技有限公司
执照已核验
| 产品名称 | 纯度 | 包装规格 | 级别 | 价格 | 库存 | 操作 |
|---|---|---|---|---|---|---|
| POM M90 共聚甲醛 | — | — | 工业级 | 电议 | — | 询价 |
常见问题
- POM M90 共聚甲醛的 CAS 号是多少？
- POM M90 共聚甲醛的 CAS 号是 None。
- POM M90 共聚甲醛的分子式和分子量是什么？
- POM M90 共聚甲醛的分子式为 (CH₂O)ₙ。
- POM M90 共聚甲醛的英文名称是什么？
- POM M90 共聚甲醛的英文名称为 Polyoxymethylene Copolymer (POM M90)。
- POM M90 共聚甲醛还有哪些别名？
- POM M90 共聚甲醛又称 聚甲醛、聚氧亚甲基、聚缩醛树脂、POM树脂、共聚甲醛树脂。
- POM M90 共聚甲醛有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条POM M90 共聚甲醛供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- POM M90 共聚甲醛的供应商主要分布在哪些地区？
- POM M90 共聚甲醛的供应商主要分布在 上海市（1 条） 等地。
- POM M90 共聚甲醛有哪些级别可选？
- 平台上POM M90 共聚甲醛的供应级别包括 工业级。
- POM M90 共聚甲醛的报价单位是什么？
- POM M90 共聚甲醛的报价单位主要有 千克。
- 哪里可以查到POM M90 共聚甲醛的价格？
- 掌上化工POM M90 共聚甲醛产品页汇总了各供应商的最新报价与规格，地址：/chemicals/pom-m90-gong-ju-jia-quan/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布POM M90 共聚甲醛采购需求
