PPS筷子 (CAS No.None)
- 物化性质
- PPS筷子采用聚苯硫醚（PPS）树脂与金属通过纳米注塑成型（NMT）技术一体成型。PPS为白色高结晶度聚合物，相对密度1.3（改性后增大），吸水率极小（约0.03%）。阻燃性好，氧指数高达44%以上。短期耐热260℃，可在200~240℃下长期使用。纯PPS弯曲模量达3.8GPa，无机填充后可达12.6GPa；玻璃纤维增强后拉伸强度由6MPa提升至137MPa。耐化学腐蚀性强，对大多数酸、酯、酮、醛、酚及脂肪烃、芳香烃、氯代烃等稳定，耐辐射性好，电绝缘性优异。
- 技术参数
- 相对密度1.3，吸水率约0.03% 阻燃氧指数≥44%，短期耐热260℃，长期使用温度200~240℃ 纯PPS弯曲模量3.8GPa，无机填充后提升至12.6GPa 玻璃纤维增强后拉伸强度由6MPa提升至137MPa，冲击强度由27J/m提高至76J/m 纳米注塑粘合强度≥3000N/cm²
English description（英文原文，共 2087 字符）
Product Name:PPS Chopsticks
English Name:PPS Chopsticks
CAS No.:26125-40-6
Aliases:Polyphenylene Sulfide Chopsticks, NMT PPS Chopsticks
Molecular Formula:(C6H4S)n
Physical Properties:PPS chopsticks are manufactured by integrating polyphenylene sulfide (PPS) resin with metal via nano molding technology (NMT). PPS is a white, highly crystalline polymer with a relative density of 1.3 (increased after modification) and extremely low water absorption (about 0.03%). It has excellent flame retardancy with an oxygen index above 44%. It can withstand short-term heat exposure up to 260°C and long-term service at 200–240°C. The flexural modulus of pure PPS reaches 3.8 GPa and can reach 12.6 GPa after inorganic filling; glass fiber reinforcement increases tensile strength from 6 MPa to 137 MPa. PPS offers strong chemical resistance to most acids, esters, ketones, aldehydes, phenols, aliphatic hydrocarbons, aromatic hydrocarbons and chlorinated hydrocarbons, along with good radiation resistance and outstanding electrical insulation.
Uses:Using nano molding technology (NMT), PPS resin and metals (aluminum, magnesium, stainless steel, titanium, etc.) are integrated into one piece to produce high-end chopsticks and tableware that combine metallic texture with PPS's heat resistance, corrosion resistance and lightweight characteristics. NMT simplifies the manufacturing process, shortens working time and reduces production costs, with bonding strength reaching above 3000 N/cm². PPS material is also widely used in automotive functional parts, mechanical wear-resistant components, electrical insulation materials and special industrial dust removal equipment.
Technical Specifications:
Relative density 1.3; water absorption approx. 0.03%
Oxygen index ≥44%; short-term heat resistance 260°C; long-term service temperature 200–240°C
Flexural modulus 3.8 GPa for pure PPS, increased to 12.6 GPa after inorganic filling
Tensile strength raised from 6 MPa to 137 MPa and impact strength from 27 J/m to 76 J/m after glass fiber reinforcement
NMT bonding strength ≥3000 N/cm²
English Name:PPS Chopsticks
CAS No.:26125-40-6
Aliases:Polyphenylene Sulfide Chopsticks, NMT PPS Chopsticks
Molecular Formula:(C6H4S)n
Physical Properties:PPS chopsticks are manufactured by integrating polyphenylene sulfide (PPS) resin with metal via nano molding technology (NMT). PPS is a white, highly crystalline polymer with a relative density of 1.3 (increased after modification) and extremely low water absorption (about 0.03%). It has excellent flame retardancy with an oxygen index above 44%. It can withstand short-term heat exposure up to 260°C and long-term service at 200–240°C. The flexural modulus of pure PPS reaches 3.8 GPa and can reach 12.6 GPa after inorganic filling; glass fiber reinforcement increases tensile strength from 6 MPa to 137 MPa. PPS offers strong chemical resistance to most acids, esters, ketones, aldehydes, phenols, aliphatic hydrocarbons, aromatic hydrocarbons and chlorinated hydrocarbons, along with good radiation resistance and outstanding electrical insulation.
Uses:Using nano molding technology (NMT), PPS resin and metals (aluminum, magnesium, stainless steel, titanium, etc.) are integrated into one piece to produce high-end chopsticks and tableware that combine metallic texture with PPS's heat resistance, corrosion resistance and lightweight characteristics. NMT simplifies the manufacturing process, shortens working time and reduces production costs, with bonding strength reaching above 3000 N/cm². PPS material is also widely used in automotive functional parts, mechanical wear-resistant components, electrical insulation materials and special industrial dust removal equipment.
Technical Specifications:
Relative density 1.3; water absorption approx. 0.03%
Oxygen index ≥44%; short-term heat resistance 260°C; long-term service temperature 200–240°C
Flexural modulus 3.8 GPa for pure PPS, increased to 12.6 GPa after inorganic filling
Tensile strength raised from 6 MPa to 137 MPa and impact strength from 27 J/m to 76 J/m after glass fiber reinforcement
NMT bonding strength ≥3000 N/cm²
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- PPS筷子的 CAS 号是多少？
- PPS筷子的 CAS 号是 None。
- PPS筷子的分子式和分子量是什么？
- PPS筷子的分子式为 (C6H4S)n。
- PPS筷子的英文名称是什么？
- PPS筷子的英文名称为 PPS Chopsticks。
- PPS筷子还有哪些别名？
- PPS筷子又称 聚苯硫醚筷子、纳米注塑PPS筷子。
- PPS筷子有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条PPS筷子供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- PPS筷子的供应商主要分布在哪些地区？
- PPS筷子的供应商主要分布在 上海市（1 条） 等地。
- PPS筷子有哪些级别可选？
- 平台上PPS筷子的供应级别包括 工业级。
- PPS筷子的报价单位是什么？
- PPS筷子的报价单位主要有 千克。
- 哪里可以查到PPS筷子的价格？
- 掌上化工PPS筷子产品页汇总了各供应商的最新报价与规格，地址：/chemicals/pps-kuai-zi/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布PPS筷子采购需求
