Ultramid B24N03 (CAS No.None)
- 中文别名
- PA6；尼龙6；聚酰胺6
- 英文名称
- Ultramid B24N03 (Polyamide 6)
- 分子式
- (C6H11NO)n
- 所属类别
- 塑料橡胶
- 物化性质
- 半透明或不透明乳白色粒子，具有热塑性，质轻，韧性好，耐化学药品性及耐久性好。密度约1.12～1.14 g/cm³，熔点约220°C，易吸水，加工前需充分干燥。
English description（英文原文，共 1453 字符）
Product Name:Ultramid B24N03 (Polyamide 6)
English Name:Ultramid B24N03 (Polyamide 6)
CAS No.:25038-54-8
Aliases:PA6, Nylon 6, Polyamide 6
Molecular Formula:(C6H11NO)n
Physical Properties:Semi-transparent or opaque milky white pellets. Thermoplastic, lightweight, tough, with good chemical resistance and durability. Density approx. 1.12–1.14 g/cm³, melting point approx. 220°C. Hygroscopic; thorough drying is required before processing.
Uses:Suitable for injection molding of automotive parts, mechanical components, electronic and electrical products, and engineering fittings. As a low-viscosity PA6 grade, it is especially suitable for thin-walled, long-flow, and structurally complex injection-molded parts.
Technical Specifications:
Drying: if moisture content exceeds 0.2%, dry in hot air above 80°C for 16 h; if exposed to air for more than 8 h, vacuum-dry at 105°C for at least 8 h.
Melting temperature: 230–280°C (250–280°C for reinforced grades).
Mold temperature: 80–90°C; higher mold temperature is recommended for structural parts and thin-walled/long-flow parts; 20–40°C low mold temperature may be used when wall thickness exceeds 3 mm.
Injection pressure: 750–1250 bar; high injection speed is recommended, slightly reduced for glass-fiber-reinforced materials.
Gate design: gate diameter should not be less than 0.5×T (T = wall thickness); use smaller gates with hot runners; minimum diameter of submarine gate is 0.75 mm.
English Name:Ultramid B24N03 (Polyamide 6)
CAS No.:25038-54-8
Aliases:PA6, Nylon 6, Polyamide 6
Molecular Formula:(C6H11NO)n
Physical Properties:Semi-transparent or opaque milky white pellets. Thermoplastic, lightweight, tough, with good chemical resistance and durability. Density approx. 1.12–1.14 g/cm³, melting point approx. 220°C. Hygroscopic; thorough drying is required before processing.
Uses:Suitable for injection molding of automotive parts, mechanical components, electronic and electrical products, and engineering fittings. As a low-viscosity PA6 grade, it is especially suitable for thin-walled, long-flow, and structurally complex injection-molded parts.
Technical Specifications:
Drying: if moisture content exceeds 0.2%, dry in hot air above 80°C for 16 h; if exposed to air for more than 8 h, vacuum-dry at 105°C for at least 8 h.
Melting temperature: 230–280°C (250–280°C for reinforced grades).
Mold temperature: 80–90°C; higher mold temperature is recommended for structural parts and thin-walled/long-flow parts; 20–40°C low mold temperature may be used when wall thickness exceeds 3 mm.
Injection pressure: 750–1250 bar; high injection speed is recommended, slightly reduced for glass-fiber-reinforced materials.
Gate design: gate diameter should not be less than 0.5×T (T = wall thickness); use smaller gates with hot runners; minimum diameter of submarine gate is 0.75 mm.
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
AI 解读这个产品
AI
AI 生成，仅供参考；价格与规格以供应商报价为准。
常见问题
- Ultramid B24N03的 CAS 号是多少？
- Ultramid B24N03的 CAS 号是 None。
- Ultramid B24N03的分子式和分子量是什么？
- Ultramid B24N03的分子式为 (C6H11NO)n。
- Ultramid B24N03的英文名称是什么？
- Ultramid B24N03的英文名称为 Ultramid B24N03 (Polyamide 6)。
展开其余 6 条问答
- Ultramid B24N03还有哪些别名？
- Ultramid B24N03又称 PA6、尼龙6、聚酰胺6。
- Ultramid B24N03有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条Ultramid B24N03供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- Ultramid B24N03的供应商主要分布在哪些地区？
- Ultramid B24N03的供应商主要分布在 上海市（1 条） 等地。
- Ultramid B24N03有哪些级别可选？
- 平台上Ultramid B24N03的供应级别包括 工业级。
- Ultramid B24N03的报价单位是什么？
- Ultramid B24N03的报价单位主要有 千克。
- 哪里可以查到Ultramid B24N03的价格？
- 掌上化工Ultramid B24N03产品页汇总了各供应商的最新报价与规格，地址：/chemicals/ultramid-b24n03/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布Ultramid B24N03采购需求
