Ultramid B3S (CAS No.None)
- 物化性质
- 密度约1.13 g/cm³，熔点约220°C，分解温度高于300°C；不溶于水，可溶于甲酸、苯酚等极性溶剂；具有高机械强度与硬度、耐热性高、电绝缘性能良好、摩擦系数低、耐磨、耐化学品；能从环境中吸收潮气，可提高断裂伸长率及韧性，但降低强度和刚度。
- 技术参数
- 熔化温度260~290°C（含玻璃添加剂产品275~280°C），应避免超过300°C。 模具温度建议80°C。 注射压力通常在750~1250 bar。 建议采用高速注射，增强型材料速度稍低。 浇口孔径应不小于0.5×塑件厚度，潜入式浇口最小直径0.75 mm。
English description（英文原文，共 1228 字符）
Product Name:Ultramid B3S
English Name:Ultramid B3S
CAS No.:25038-54-4
Aliases:Nylon 6, Polyamide 6, PA6
Molecular Formula:(C6H11NO)n
Physical Properties:Density approx. 1.13 g/cm³, melting point approx. 220°C, decomposition temperature above 300°C; insoluble in water, soluble in polar solvents such as formic acid and phenol; high mechanical strength and rigidity, high heat resistance, good electrical insulation, low friction coefficient, wear resistance, and chemical resistance; absorbs moisture from the environment, improving elongation at break and toughness but reducing strength and rigidity.
Uses:Suitable for automotive, electrical engineering, and machinery construction fields, used to manufacture injection-molded parts requiring high mechanical strength, heat resistance, wear resistance, and good processability.
Technical Specifications:
Melting temperature is 260–290°C (275–280°C for glass-additive products); avoid exceeding 300°C.
Recommended mold temperature is 80°C.
Injection pressure is typically 750–1250 bar.
Use high injection speed, slightly lower for reinforced materials.
Gate diameter should not be less than 0.5 times the part thickness; minimum submerged gate diameter is 0.75 mm.
English Name:Ultramid B3S
CAS No.:25038-54-4
Aliases:Nylon 6, Polyamide 6, PA6
Molecular Formula:(C6H11NO)n
Physical Properties:Density approx. 1.13 g/cm³, melting point approx. 220°C, decomposition temperature above 300°C; insoluble in water, soluble in polar solvents such as formic acid and phenol; high mechanical strength and rigidity, high heat resistance, good electrical insulation, low friction coefficient, wear resistance, and chemical resistance; absorbs moisture from the environment, improving elongation at break and toughness but reducing strength and rigidity.
Uses:Suitable for automotive, electrical engineering, and machinery construction fields, used to manufacture injection-molded parts requiring high mechanical strength, heat resistance, wear resistance, and good processability.
Technical Specifications:
Melting temperature is 260–290°C (275–280°C for glass-additive products); avoid exceeding 300°C.
Recommended mold temperature is 80°C.
Injection pressure is typically 750–1250 bar.
Use high injection speed, slightly lower for reinforced materials.
Gate diameter should not be less than 0.5 times the part thickness; minimum submerged gate diameter is 0.75 mm.
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- Ultramid B3S的 CAS 号是多少？
- Ultramid B3S的 CAS 号是 None。
- Ultramid B3S的分子式和分子量是什么？
- Ultramid B3S的分子式为 (C6H11NO)n。
- Ultramid B3S的英文名称是什么？
- Ultramid B3S的英文名称为 Ultramid B3S。
- Ultramid B3S还有哪些别名？
- Ultramid B3S又称 尼龙6、聚酰胺6、PA6。
- Ultramid B3S有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条Ultramid B3S供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- Ultramid B3S的供应商主要分布在哪些地区？
- Ultramid B3S的供应商主要分布在 上海市（1 条） 等地。
- Ultramid B3S有哪些级别可选？
- 平台上Ultramid B3S的供应级别包括 工业级。
- Ultramid B3S的报价单位是什么？
- Ultramid B3S的报价单位主要有 千克。
- 哪里可以查到Ultramid B3S的价格？
- 掌上化工Ultramid B3S产品页汇总了各供应商的最新报价与规格，地址：/chemicals/ultramid-b3s/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布Ultramid B3S采购需求
