混凝土标准养护箱 (CAS No.None)
- 物化性质
- 箱体采用内外两层结构，外箱体为优质冷轧钢板，内箱体为不锈钢板，搁板为不锈钢型材，防腐蚀性好。内箱体下部设有水箱，用于加热及辅助增湿；增湿系统以超声波增湿仪为主，水加热蒸发为辅。自动控制系统由控温仪及控湿仪表按给定的温、湿度对制冷、加热及增湿实行自动切换，箱内温湿度由数字仪表显示。温控时，当箱内温度低于下限给定值时加热，高于上限给定值时制冷；湿控时，湿度低于95%时超声波加湿器工作，达到回差后自动停止，回差值应调在0-1℃。
English description（英文原文，共 2236 字符）
Product Name:Concrete Standard Curing Box
English Name:Concrete Standard Curing Box
Aliases:Standard curing box, Concrete test block curing box, Concrete curing chamber
Physical Properties:The box adopts an inner and outer two-layer structure. The outer box is made of high-quality cold-rolled steel plate, the inner box is made of stainless steel plate, and the shelves are made of stainless steel profiles, providing good corrosion resistance. A water tank is installed at the lower part of the inner box for heating and auxiliary humidification. The humidification system mainly uses an ultrasonic humidifier, supplemented by water heating evaporation. The automatic control system uses temperature and humidity controllers to automatically switch cooling, heating, and humidification according to the set values, and the temperature and humidity are displayed by digital instruments. For temperature control, heating is activated when the temperature falls below the lower limit, and cooling is activated when it exceeds the upper limit. For humidity control, when the humidity is lower than 95%, the ultrasonic humidifier operates and automatically stops after reaching the differential, which should be adjusted to 0-1℃.
Uses:Used for standard curing of concrete test specimens, maintaining concrete test blocks under constant temperature and humidity conditions. Suitable for quality testing, scientific research experiments in construction, highway, bridge engineering, and curing of test blocks at construction sites.
Technical Specifications:
Temperature control range: 20℃±1℃, humidity ≥95%RH.
Model 60B: external dimensions 1120×630×1550mm, internal dimensions 700×520×1250mm, double doors, holds 40 groups (120 pieces) of 150×150×150mm concrete test blocks, heating tube power 1000W.
Model 90B: external dimensions 1640×620×1470mm, internal dimensions 1200×500×1100mm, three doors, holds 60 groups (180 pieces) of 150×150×150mm concrete test blocks, heating tube power 2000W.
Additional large-capacity specification: external dimensions 1980×700×1460mm, internal dimensions 1550×630×1200mm.
The white plastic box of the internal sensor should be filled with water; check frequently and do not allow it to run dry.
English Name:Concrete Standard Curing Box
Aliases:Standard curing box, Concrete test block curing box, Concrete curing chamber
Physical Properties:The box adopts an inner and outer two-layer structure. The outer box is made of high-quality cold-rolled steel plate, the inner box is made of stainless steel plate, and the shelves are made of stainless steel profiles, providing good corrosion resistance. A water tank is installed at the lower part of the inner box for heating and auxiliary humidification. The humidification system mainly uses an ultrasonic humidifier, supplemented by water heating evaporation. The automatic control system uses temperature and humidity controllers to automatically switch cooling, heating, and humidification according to the set values, and the temperature and humidity are displayed by digital instruments. For temperature control, heating is activated when the temperature falls below the lower limit, and cooling is activated when it exceeds the upper limit. For humidity control, when the humidity is lower than 95%, the ultrasonic humidifier operates and automatically stops after reaching the differential, which should be adjusted to 0-1℃.
Uses:Used for standard curing of concrete test specimens, maintaining concrete test blocks under constant temperature and humidity conditions. Suitable for quality testing, scientific research experiments in construction, highway, bridge engineering, and curing of test blocks at construction sites.
Technical Specifications:
Temperature control range: 20℃±1℃, humidity ≥95%RH.
Model 60B: external dimensions 1120×630×1550mm, internal dimensions 700×520×1250mm, double doors, holds 40 groups (120 pieces) of 150×150×150mm concrete test blocks, heating tube power 1000W.
Model 90B: external dimensions 1640×620×1470mm, internal dimensions 1200×500×1100mm, three doors, holds 60 groups (180 pieces) of 150×150×150mm concrete test blocks, heating tube power 2000W.
Additional large-capacity specification: external dimensions 1980×700×1460mm, internal dimensions 1550×630×1200mm.
The white plastic box of the internal sensor should be filled with water; check frequently and do not allow it to run dry.
共 1 家生产厂家、批发商，
1 条供应报价
AI 解读这个产品
AI
AI 生成，仅供参考；价格与规格以供应商报价为准。
供应报价
常见问题
- 混凝土标准养护箱的 CAS 号是多少？
- 混凝土标准养护箱的 CAS 号是 None。
- 混凝土标准养护箱的英文名称是什么？
- 混凝土标准养护箱的英文名称为 Concrete Standard Curing Box。
- 混凝土标准养护箱还有哪些别名？
- 混凝土标准养护箱又称 标准养护箱、混凝土试块养护箱、混凝土养护箱。
- 混凝土标准养护箱有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条混凝土标准养护箱供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- 混凝土标准养护箱的供应商主要分布在哪些地区？
- 混凝土标准养护箱的供应商主要分布在 上海市（1 条） 等地。
- 混凝土标准养护箱有哪些级别可选？
- 平台上混凝土标准养护箱的供应级别包括 工业级。
- 混凝土标准养护箱的报价单位是什么？
- 混凝土标准养护箱的报价单位主要有 千克。
- 哪里可以查到混凝土标准养护箱的价格？
- 掌上化工混凝土标准养护箱产品页汇总了各供应商的最新报价与规格，地址：/chemicals/hun-ning-tu-biao-zhun-yang-hu-xiang/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布混凝土标准养护箱采购需求
