聚苯硫醚PPS 1140A6 (CAS No.None)
- 物化性质
- 玻纤增强级密度约1.6 g/cm³，熔点约280-285℃，连续使用温度220-240℃，在1.82 MPa负荷下热变形温度260℃以上；无需添加阻燃剂即可达UL94 V-0和5-V级（无滴落），燃烧发烟量低；200℃以下不溶于任何有机溶剂（除强氧化性酸外），耐辐射稳定；吸水率低，成型收缩率小，尺寸稳定性优异；电绝缘性和介电强度良好。
- 技术参数
- 连续使用温度高达220-240℃，在1.82 MPa负荷下热变形温度在260℃以上。 无需添加阻燃剂即可达到UL94 V-0和5-V级（无滴落），燃烧发烟量低。 耐化学性极好，200℃以下不溶于任何有机溶剂，除强氧化性酸外，且耐辐射稳定。 吸水率低，成型收缩率小，线膨胀小，高温下尺寸稳定性优异。 电绝缘性和介电强度良好，在高温、高湿和高频条件下变化不大。
English description（英文原文，共 1853 字符）
Product Name:Polyphenylene Sulfide (PPS) 1140A6
English Name:Polyphenylene Sulfide 1140A6
CAS No.:26125-40-6
Aliases:PPS, Polythio-1,4-phenylene, Poly(1,4-phenylene sulfide)
Molecular Formula:(C6H4S)n
Physical Properties:Glass-fiber reinforced grade density approx. 1.6 g/cm³, melting point approx. 280-285°C, continuous service temperature 220-240°C, heat deflection temperature above 260°C under 1.82 MPa load; achieves UL94 V-0 and 5-V rating (no dripping) without adding flame retardants, with low smoke generation; insoluble in all organic solvents below 200°C except strongly oxidizing acids, stable under various radiation; low water absorption, low molding shrinkage, excellent dimensional stability; good electrical insulation and dielectric strength.
Uses:Mainly used for bobbins, electronic and electrical connectors, IC sockets, coil bobbins and other components, automotive engine parts, fuel pump and ignition system parts, compressor parts, impellers and gear pumps in mechanical applications, as well as corrosion-resistant valves, pipes and pump bodies in chemical industry. Glass or carbon fiber composites can be used for aerospace structural parts.
Technical Specifications:
Continuous service temperature reaches 220-240°C; heat deflection temperature under 1.82 MPa load is above 260°C.
Achieves UL94 V-0 and 5-V rating (no dripping) without adding flame retardants, with low smoke generation.
Excellent chemical resistance; insoluble in all organic solvents below 200°C except strongly oxidizing acids, and stable under various radiation.
Low water absorption, low molding shrinkage and low linear expansion, providing excellent dimensional stability even at high temperatures.
Good electrical insulation and dielectric strength, with minimal change under high temperature, high humidity and high frequency conditions.
English Name:Polyphenylene Sulfide 1140A6
CAS No.:26125-40-6
Aliases:PPS, Polythio-1,4-phenylene, Poly(1,4-phenylene sulfide)
Molecular Formula:(C6H4S)n
Physical Properties:Glass-fiber reinforced grade density approx. 1.6 g/cm³, melting point approx. 280-285°C, continuous service temperature 220-240°C, heat deflection temperature above 260°C under 1.82 MPa load; achieves UL94 V-0 and 5-V rating (no dripping) without adding flame retardants, with low smoke generation; insoluble in all organic solvents below 200°C except strongly oxidizing acids, stable under various radiation; low water absorption, low molding shrinkage, excellent dimensional stability; good electrical insulation and dielectric strength.
Uses:Mainly used for bobbins, electronic and electrical connectors, IC sockets, coil bobbins and other components, automotive engine parts, fuel pump and ignition system parts, compressor parts, impellers and gear pumps in mechanical applications, as well as corrosion-resistant valves, pipes and pump bodies in chemical industry. Glass or carbon fiber composites can be used for aerospace structural parts.
Technical Specifications:
Continuous service temperature reaches 220-240°C; heat deflection temperature under 1.82 MPa load is above 260°C.
Achieves UL94 V-0 and 5-V rating (no dripping) without adding flame retardants, with low smoke generation.
Excellent chemical resistance; insoluble in all organic solvents below 200°C except strongly oxidizing acids, and stable under various radiation.
Low water absorption, low molding shrinkage and low linear expansion, providing excellent dimensional stability even at high temperatures.
Good electrical insulation and dielectric strength, with minimal change under high temperature, high humidity and high frequency conditions.
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- 聚苯硫醚PPS 1140A6的 CAS 号是多少？
- 聚苯硫醚PPS 1140A6的 CAS 号是 None。
- 聚苯硫醚PPS 1140A6的分子式和分子量是什么？
- 聚苯硫醚PPS 1140A6的分子式为 (C6H4S)n。
- 聚苯硫醚PPS 1140A6的英文名称是什么？
- 聚苯硫醚PPS 1140A6的英文名称为 Polyphenylene Sulfide 1140A6。
- 聚苯硫醚PPS 1140A6还有哪些别名？
- 聚苯硫醚PPS 1140A6又称 PPS、聚苯撑硫、聚亚苯基硫醚。
- 聚苯硫醚PPS 1140A6有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条聚苯硫醚PPS 1140A6供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- 聚苯硫醚PPS 1140A6的供应商主要分布在哪些地区？
- 聚苯硫醚PPS 1140A6的供应商主要分布在 上海市（1 条） 等地。
- 聚苯硫醚PPS 1140A6有哪些级别可选？
- 平台上聚苯硫醚PPS 1140A6的供应级别包括 工业级。
- 聚苯硫醚PPS 1140A6的报价单位是什么？
- 聚苯硫醚PPS 1140A6的报价单位主要有 千克。
- 哪里可以查到聚苯硫醚PPS 1140A6的价格？
- 掌上化工聚苯硫醚PPS 1140A6产品页汇总了各供应商的最新报价与规格，地址：/chemicals/ju-ben-liu-mi-pps-1140a6/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布聚苯硫醚PPS 1140A6采购需求
