PC-110通用级PC塑料颗粒 (CAS No.None)

Product Name:PC-110 General Grade PC Plastic Pellets

English Name:PC-110 General Grade PC Plastic Pellets

CAS No.:25037-45-0

Aliases:Polycarbonate, PC resin, Bisphenol A polycarbonate, PC plastic

Molecular Formula:(C16H14O3)n

Physical Properties:Translucent to transparent pellets with a density of 1.18-1.20 g/cm³, medium viscosity, light transmittance ≥88%, and a refractive index of approximately 1.585. It exhibits excellent impact resistance, creep resistance, and dimensional stability, with a service temperature range of -40°C to 120°C and water absorption of about 0.15%-0.25%.

Uses:Suitable for injection molding of automotive parts, industrial machinery components, electronic and electrical appliance parts, consumer electronic parts, home appliance components, and sanitary fittings. The high transparency and high impact strength make it ideal for transparent protective covers, lamp housings, dashboards, and enclosures. Its medium viscosity provides a wide processing window and short molding cycles, making it widely used in general engineering plastics applications.

Technical Specifications:

Density: 1.18-1.20 g/cm³, light transmittance ≥88%, water absorption approximately 0.2%.

Tensile strength ≥60 MPa, flexural strength ≥90 MPa, notched impact strength ≥60 kJ/m².

Heat deflection temperature (1.82 MPa) ≥120°C, continuous service temperature -40°C to 120°C.

Melt flow rate (300°C/1.2 kg): 8-15 g/10min, suitable for general injection molding.

Processing temperature 260-300°C; drying at 105-120°C for at least 4 hours is recommended.