PEEK板 (CAS No.None)
- 中文别名
- 聚醚醚酮板；PEEK板材；聚醚醚酮工程塑料板
- 英文名称
- PEEK Plate (Polyether Ether Ketone Plate)
- 分子式
- (C19H12O3)n
- 所属类别
- 塑料橡胶
- 物化性质
- PEEK板为半结晶性芳香族热塑性塑料，外观有本色、黑色、褐色、米黄色等。具有优异的耐高温性能（熔点约343°C，连续使用温度约260°C）、耐化学腐蚀性和机械性能。主要级别包括：PEEK-1000（纯树脂，韧性和抗冲击性优异）、PEEK-HPV（加入PTFE、石墨和碳纤维的轴承级材料，摩擦系数低、耐磨）、PEEK-GF30（填充30%玻璃纤维，刚性和抗蠕变性好）、PEEK-CA30（填充30%碳纤维，机械性能更优，导热性约为未增强的3.5倍）。密度约1.30-1.32 g/cm³，吸水率低，尺寸稳定性好。
- 密度
- 1.30-1.32 g/cm³（PEEK-1000）
- 熔点
- 约343°C，连续使用温度：约260°C
English description（英文原文，共 2016 字符）
Product Name:PEEK Plate (Polyether Ether Ketone Plate)
English Name:PEEK Plate (Polyether Ether Ketone Plate)
CAS No.:29658-26-2
Aliases:Polyether ether ketone board, PEEK sheet, PEEK board
Molecular Formula:(C19H12O3)n
Physical Properties:PEEK plate is a semi-crystalline aromatic thermoplastic, available in natural, black, brown, and beige. It exhibits excellent high-temperature resistance (melting point approximately 343°C, continuous service temperature approximately 260°C), chemical resistance, and mechanical properties. Main grades include: PEEK-1000 (pure resin with excellent toughness and impact resistance), PEEK-HPV (bearing-grade material filled with PTFE, graphite, and carbon fiber, featuring low friction coefficient and high wear resistance), PEEK-GF30 (reinforced with 30% glass fiber, offering good rigidity and creep resistance), and PEEK-CA30 (reinforced with 30% carbon fiber, providing superior mechanical properties and approximately 3.5 times higher thermal conductivity than unreinforced PEEK). Density is approximately 1.30-1.32 g/cm³ with low water absorption and excellent dimensional stability.
Uses:Owing to its excellent high-temperature resistance, chemical resistance, and mechanical properties, PEEK plate is used in the aerospace industry to replace aluminum and other metals for manufacturing various aircraft components. In the automotive industry, it is used to produce engine covers, bearings, gaskets, seals, clutch teeth rings, and other components in transmission, braking, and air conditioning systems. It is also widely applied in precision electronics, medical devices, machinery manufacturing, food machinery, pumps and valves, and bearings.
Technical Specifications:
Density: 1.30-1.32 g/cm³ (PEEK-1000)
Melting point: approximately 343°C; continuous service temperature: approximately 260°C
Tensile strength: ≥90 MPa (PEEK-1000)
Volume resistivity: ≥10^15 Ω·cm
Available as plates (2-100 mm thick, 500×1000 mm) and sheets (0.1-2 mm thick, 200 mm wide)
English Name:PEEK Plate (Polyether Ether Ketone Plate)
CAS No.:29658-26-2
Aliases:Polyether ether ketone board, PEEK sheet, PEEK board
Molecular Formula:(C19H12O3)n
Physical Properties:PEEK plate is a semi-crystalline aromatic thermoplastic, available in natural, black, brown, and beige. It exhibits excellent high-temperature resistance (melting point approximately 343°C, continuous service temperature approximately 260°C), chemical resistance, and mechanical properties. Main grades include: PEEK-1000 (pure resin with excellent toughness and impact resistance), PEEK-HPV (bearing-grade material filled with PTFE, graphite, and carbon fiber, featuring low friction coefficient and high wear resistance), PEEK-GF30 (reinforced with 30% glass fiber, offering good rigidity and creep resistance), and PEEK-CA30 (reinforced with 30% carbon fiber, providing superior mechanical properties and approximately 3.5 times higher thermal conductivity than unreinforced PEEK). Density is approximately 1.30-1.32 g/cm³ with low water absorption and excellent dimensional stability.
Uses:Owing to its excellent high-temperature resistance, chemical resistance, and mechanical properties, PEEK plate is used in the aerospace industry to replace aluminum and other metals for manufacturing various aircraft components. In the automotive industry, it is used to produce engine covers, bearings, gaskets, seals, clutch teeth rings, and other components in transmission, braking, and air conditioning systems. It is also widely applied in precision electronics, medical devices, machinery manufacturing, food machinery, pumps and valves, and bearings.
Technical Specifications:
Density: 1.30-1.32 g/cm³ (PEEK-1000)
Melting point: approximately 343°C; continuous service temperature: approximately 260°C
Tensile strength: ≥90 MPa (PEEK-1000)
Volume resistivity: ≥10^15 Ω·cm
Available as plates (2-100 mm thick, 500×1000 mm) and sheets (0.1-2 mm thick, 200 mm wide)
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- PEEK板的 CAS 号是多少？
- PEEK板的 CAS 号是 None。
- PEEK板的分子式和分子量是什么？
- PEEK板的分子式为 (C19H12O3)n。
- PEEK板的英文名称是什么？
- PEEK板的英文名称为 PEEK Plate (Polyether Ether Ketone Plate)。
- PEEK板还有哪些别名？
- PEEK板又称 聚醚醚酮板、PEEK板材、聚醚醚酮工程塑料板。
- PEEK板有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条PEEK板供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- PEEK板的供应商主要分布在哪些地区？
- PEEK板的供应商主要分布在 上海市（1 条） 等地。
- PEEK板有哪些级别可选？
- 平台上PEEK板的供应级别包括 工业级。
- PEEK板的报价单位是什么？
- PEEK板的报价单位主要有 千克。
- 哪里可以查到PEEK板的价格？
- 掌上化工PEEK板产品页汇总了各供应商的最新报价与规格，地址：/chemicals/peek-ban/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布PEEK板采购需求
