PPA HTN51G35HSLR (CAS No.None)
- 物化性质
- 密度1.47g/cm³；热变形温度高，耐高温、耐水解；热稳定性好；玻纤增强，机械强度高。建议干燥温度175°F（约79°C），干燥至露点-25°F（约-32°C），干燥时间4-16小时；注塑熔融温度615-650°F（约324-343°C），机筒停留时间不超过10分钟；模具温度至少275°F（约135°C）以获得完全结晶和尺寸稳定性的产品，电镀或真空镀金属用矿物填料级模具表面温度要求350°F（约177°C）。
- 密度
- 1.47 g/cm³
English description（英文原文，共 1222 字符）
Product Name:PPA HTN51G35HSLR
English Name:PPA HTN51G35HSLR
Aliases:DuPont HTN51G35HSLR, Glass fiber reinforced PPA HTN51G35HSLR
Physical Properties:Density 1.47 g/cm³; high heat deflection temperature, resistant to high temperature and hydrolysis; good thermal stability; glass fiber reinforced with high mechanical strength. Recommended drying temperature 175°F (approx. 79°C), drying to dew point -25°F (approx. -32°C), drying time 4-16 hours; injection molding melt temperature 615-650°F (approx. 324-343°C), barrel residence time not exceeding 10 minutes; mold temperature at least 275°F (approx. 135°C) to achieve fully crystalline and dimensionally stable products; for mineral-filled grades used in vacuum metallization or electroplating, mold surface temperature required at 350°F (approx. 177°C).
Uses:Used for injection molding and extrusion of automotive interior parts, power tools, and electrical appliances, suitable for engineering components requiring high temperature resistance, hydrolysis resistance, and high mechanical strength.
Technical Specifications:
Density: 1.47 g/cm³
Tensile strength at break: 220 MPa
Elongation at break: 2.4%
Tensile modulus: 12500 MPa
Flexural modulus: 10300 MPa
English Name:PPA HTN51G35HSLR
Aliases:DuPont HTN51G35HSLR, Glass fiber reinforced PPA HTN51G35HSLR
Physical Properties:Density 1.47 g/cm³; high heat deflection temperature, resistant to high temperature and hydrolysis; good thermal stability; glass fiber reinforced with high mechanical strength. Recommended drying temperature 175°F (approx. 79°C), drying to dew point -25°F (approx. -32°C), drying time 4-16 hours; injection molding melt temperature 615-650°F (approx. 324-343°C), barrel residence time not exceeding 10 minutes; mold temperature at least 275°F (approx. 135°C) to achieve fully crystalline and dimensionally stable products; for mineral-filled grades used in vacuum metallization or electroplating, mold surface temperature required at 350°F (approx. 177°C).
Uses:Used for injection molding and extrusion of automotive interior parts, power tools, and electrical appliances, suitable for engineering components requiring high temperature resistance, hydrolysis resistance, and high mechanical strength.
Technical Specifications:
Density: 1.47 g/cm³
Tensile strength at break: 220 MPa
Elongation at break: 2.4%
Tensile modulus: 12500 MPa
Flexural modulus: 10300 MPa
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- PPA HTN51G35HSLR的 CAS 号是多少？
- PPA HTN51G35HSLR的 CAS 号是 None。
- PPA HTN51G35HSLR的英文名称是什么？
- PPA HTN51G35HSLR的英文名称为 PPA HTN51G35HSLR。
- PPA HTN51G35HSLR还有哪些别名？
- PPA HTN51G35HSLR又称 杜邦HTN51G35HSLR、玻纤增强PPA HTN51G35HSLR。
- PPA HTN51G35HSLR有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条PPA HTN51G35HSLR供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- PPA HTN51G35HSLR的供应商主要分布在哪些地区？
- PPA HTN51G35HSLR的供应商主要分布在 上海市（1 条） 等地。
- PPA HTN51G35HSLR有哪些级别可选？
- 平台上PPA HTN51G35HSLR的供应级别包括 工业级。
- PPA HTN51G35HSLR的报价单位是什么？
- PPA HTN51G35HSLR的报价单位主要有 千克。
- 哪里可以查到PPA HTN51G35HSLR的价格？
- 掌上化工PPA HTN51G35HSLR产品页汇总了各供应商的最新报价与规格，地址：/chemicals/ppa-htn51g35hslr/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布PPA HTN51G35HSLR采购需求
