高光泽ABS HG-173 (CAS No.None)
- 物化性质
- 外观为不透明象牙色粒料，无毒、无味，吸水率低，制品可着成各种颜色，表面光泽度可达90%。氧指数为18.2，属易燃聚合物，燃烧时火焰呈黄色、冒黑烟，烧焦但不滴落，并发出特殊肉桂味。综合力学性能良好，在较宽温度范围内具有较高冲击强度和表面硬度，耐磨性优良，尺寸稳定性好，耐油。ABS为无定形聚合物，无明显熔点，熔体流动性好于PVC和PC，但差于PE、PA和PS，流动特性属非牛顿流体，对剪切速率敏感；热变形温度70-107°C，退火处理后约提高10°C，长期使用温度-40°C至85°C。电绝缘性较好，几乎不受温度、湿度和频率影响。耐水、无机盐、碱醇类、烃类溶剂及多种酸，但可溶于酮类、醛类及氯代烃，受冰乙酸、植物油等侵蚀会产生应力开裂。
- 技术参数
- 外观为不透明象牙色粒料，无毒无味，吸水率低，表面光泽度可达90%。 密度约1.05 g/cm³。 氧指数18.2，属易燃聚合物，燃烧时火焰黄色、冒黑烟，烧焦但不滴落，并发出特殊肉桂味。 热变形温度70-107°C（约85°C），经退火处理后可提高约10°C；长期使用温度范围-40°C至85°C。 电绝缘性良好，几乎不受温度、湿度和频率影响；耐水、无机盐、碱、醇类、烃类及多种酸，可溶于酮类、醛类和氯代烃。
English description（英文原文，共 2823 字符）
Product Name:High Gloss ABS HG-173
English Name:High Gloss ABS HG-173
CAS No.:9003-56-9
Aliases:ABS resin, Acrylonitrile-butadiene-styrene copolymer, ABS plastic
Molecular Formula:(C8H8·C4H6·C3H3N)n
Physical Properties:Appearance: opaque ivory-colored pellets; non-toxic, odorless, low water absorption; can be colored into various shades, with surface gloss up to 90%. Oxygen index is 18.2, a flammable polymer; flame is yellow with black smoke when burning, charred but without dripping, and emits a special cinnamon-like odor. It has good overall mechanical properties, high impact strength and surface hardness over a wide temperature range, excellent wear resistance, good dimensional stability and oil resistance. ABS is an amorphous polymer without a distinct melting point; melt fluidity is better than PVC and PC but poorer than PE, PA and PS, showing non-Newtonian flow behavior and sensitivity to shear rate. Heat deflection temperature is 70-107°C; annealing can increase it by about 10°C. Long-term service temperature ranges from -40°C to 85°C. It has good electrical insulation, almost unaffected by temperature, humidity and frequency. Resistant to water, inorganic salts, alkalis, alcohols, hydrocarbon solvents and many acids, but soluble in ketones, aldehydes and chlorinated hydrocarbons; stress cracking may occur when attacked by glacial acetic acid or vegetable oils.
Uses:Mainly used in automotive, electronic/electrical and building materials fields. Automotive parts include instrument panels, exterior body panels, interior trim panels, steering wheels, sound insulation boards, door locks, bumpers and ventilation ducts. In electronics and electrical appliances, it is widely used in refrigerators, televisions, washing machines, air conditioners, computers and copiers. In building materials, it is used for ABS pipes, sanitary ware and decorative panels. It is also applied in gears, bearings, handles, pipes, instrument housings, safety helmets, refrigerator liners, blades and other mechanical and instrument parts, as well as daily goods such as shoes, bags, travel cases, office equipment, toys and various containers.
Technical Specifications:
Opaque ivory pellets; non-toxic, odorless, low water absorption; surface gloss up to 90%.
Density: approx. 1.05 g/cm³.
Oxygen index: 18.2; flammable polymer; yellow flame with black smoke, charred without dripping and with special cinnamon odor.
Heat deflection temperature: 70-107°C (approx. 85°C); can be increased by about 10°C after annealing; long-term service temperature: -40°C to 85°C.
Good electrical insulation, almost unaffected by temperature, humidity and frequency; resistant to water, inorganic salts, alkalis, alcohols, hydrocarbon solvents and many acids; soluble in ketones, aldehydes and chlorinated hydrocarbons.
English Name:High Gloss ABS HG-173
CAS No.:9003-56-9
Aliases:ABS resin, Acrylonitrile-butadiene-styrene copolymer, ABS plastic
Molecular Formula:(C8H8·C4H6·C3H3N)n
Physical Properties:Appearance: opaque ivory-colored pellets; non-toxic, odorless, low water absorption; can be colored into various shades, with surface gloss up to 90%. Oxygen index is 18.2, a flammable polymer; flame is yellow with black smoke when burning, charred but without dripping, and emits a special cinnamon-like odor. It has good overall mechanical properties, high impact strength and surface hardness over a wide temperature range, excellent wear resistance, good dimensional stability and oil resistance. ABS is an amorphous polymer without a distinct melting point; melt fluidity is better than PVC and PC but poorer than PE, PA and PS, showing non-Newtonian flow behavior and sensitivity to shear rate. Heat deflection temperature is 70-107°C; annealing can increase it by about 10°C. Long-term service temperature ranges from -40°C to 85°C. It has good electrical insulation, almost unaffected by temperature, humidity and frequency. Resistant to water, inorganic salts, alkalis, alcohols, hydrocarbon solvents and many acids, but soluble in ketones, aldehydes and chlorinated hydrocarbons; stress cracking may occur when attacked by glacial acetic acid or vegetable oils.
Uses:Mainly used in automotive, electronic/electrical and building materials fields. Automotive parts include instrument panels, exterior body panels, interior trim panels, steering wheels, sound insulation boards, door locks, bumpers and ventilation ducts. In electronics and electrical appliances, it is widely used in refrigerators, televisions, washing machines, air conditioners, computers and copiers. In building materials, it is used for ABS pipes, sanitary ware and decorative panels. It is also applied in gears, bearings, handles, pipes, instrument housings, safety helmets, refrigerator liners, blades and other mechanical and instrument parts, as well as daily goods such as shoes, bags, travel cases, office equipment, toys and various containers.
Technical Specifications:
Opaque ivory pellets; non-toxic, odorless, low water absorption; surface gloss up to 90%.
Density: approx. 1.05 g/cm³.
Oxygen index: 18.2; flammable polymer; yellow flame with black smoke, charred without dripping and with special cinnamon odor.
Heat deflection temperature: 70-107°C (approx. 85°C); can be increased by about 10°C after annealing; long-term service temperature: -40°C to 85°C.
Good electrical insulation, almost unaffected by temperature, humidity and frequency; resistant to water, inorganic salts, alkalis, alcohols, hydrocarbon solvents and many acids; soluble in ketones, aldehydes and chlorinated hydrocarbons.
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- 高光泽ABS HG-173的 CAS 号是多少？
- 高光泽ABS HG-173的 CAS 号是 None。
- 高光泽ABS HG-173的分子式和分子量是什么？
- 高光泽ABS HG-173的分子式为 (C8H8·C4H6·C3H3N)n。
- 高光泽ABS HG-173的英文名称是什么？
- 高光泽ABS HG-173的英文名称为 High Gloss ABS HG-173。
- 高光泽ABS HG-173还有哪些别名？
- 高光泽ABS HG-173又称 ABS树脂、丙烯腈-丁二烯-苯乙烯共聚物、ABS塑料。
- 高光泽ABS HG-173有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条高光泽ABS HG-173供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- 高光泽ABS HG-173的供应商主要分布在哪些地区？
- 高光泽ABS HG-173的供应商主要分布在 上海市（1 条） 等地。
- 高光泽ABS HG-173有哪些级别可选？
- 平台上高光泽ABS HG-173的供应级别包括 工业级。
- 高光泽ABS HG-173的报价单位是什么？
- 高光泽ABS HG-173的报价单位主要有 千克。
- 哪里可以查到高光泽ABS HG-173的价格？
- 掌上化工高光泽ABS HG-173产品页汇总了各供应商的最新报价与规格，地址：/chemicals/gao-guang-ze-abs-hg-173/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布高光泽ABS HG-173采购需求
