红外线穿透PC (CAS No.None)
- 中文别名
- 红外穿透PC；红外透射聚碳酸酯；IR穿透PC
- 英文名称
- Infrared-transmitting Polycarbonate (PC)
- 分子式
- (C16H14O3)n
- 所属类别
- 塑料橡胶
- 物化性质
- 无定形、无臭、无毒、高度透明的无色或微黄色热塑性工程塑料。具有优良的耐冲击性、拉伸强度、弯曲强度和压缩强度，蠕变性小，尺寸稳定；耐热性和耐低温性好，可在-60~120℃下长期使用。无明显熔点，220-230℃呈熔融状态；吸水率小，收缩率小，尺寸精度高，尺寸稳定性好；属自熄性材料，对光稳定但不耐紫外光，耐候性好；耐油、耐酸，不耐强碱、氧化性酸及胺、酮类，溶于氯化烃类和芳香族溶剂，长期在水中易引起水解和开裂。该红外线穿透型号通过特殊分子结构和添加剂配方，允许红外线透过，可见光透明度略低于普通PC，但仍保持一定透明性。
- 技术参数
- 红外线透过率（波长950nm）≥85% 可见光透过率≥70%，保持一定的可视性 密度约1.2 g/cm³，拉伸强度≥60 MPa 缺口冲击强度≥60 kJ/m²，耐磨性良好 长期使用温度范围-60~120℃
English description（英文原文，共 2065 字符）
Product Name:Infrared-transmitting Polycarbonate (PC)
English Name:Infrared-transmitting Polycarbonate (PC)
CAS No.:25037-45-0
Aliases:IR-transmitting PC, Infrared-transmitting polycarbonate
Molecular Formula:(C16H14O3)n
Physical Properties:Amorphous, odorless, non-toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastic. It has excellent impact resistance, tensile strength, flexural strength and compressive strength, low creep, and good dimensional stability. It exhibits good heat resistance and low-temperature resistance, and can be used long-term at -60~120℃. It has no obvious melting point and becomes molten at 220-230℃. Low water absorption, low shrinkage, high dimensional accuracy and good dimensional stability. Self-extinguishing, stable to light but not to UV light, with good weatherability. Resistant to oils and acids, but not to strong alkalis, oxidizing acids, amines and ketones. Soluble in chlorinated hydrocarbons and aromatic solvents; prolonged exposure to water may cause hydrolysis and cracking. This infrared-transmitting grade is designed with special molecular structure and additive formulation to allow infrared radiation to pass through, with slightly lower visible light transparency than ordinary PC while maintaining a certain transparency.
Uses:Infrared-transmitting PC is mainly used in housings for infrared sensing devices such as infrared remote controls and infrared sensors, without affecting the transmission and reception of infrared signals while protecting internal precision components. It is also used in optical detection and imaging equipment components, as well as infrared camera housings in security surveillance, ensuring clear infrared monitoring images at night.
Technical Specifications:
Infrared transmittance ≥85% at 950 nm wavelength
Visible light transmittance ≥70% for sufficient visibility
Density approx. 1.2 g/cm³, tensile strength ≥60 MPa
Notched impact strength ≥60 kJ/m² with good wear resistance
Long-term service temperature range from -60 to 120℃
English Name:Infrared-transmitting Polycarbonate (PC)
CAS No.:25037-45-0
Aliases:IR-transmitting PC, Infrared-transmitting polycarbonate
Molecular Formula:(C16H14O3)n
Physical Properties:Amorphous, odorless, non-toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastic. It has excellent impact resistance, tensile strength, flexural strength and compressive strength, low creep, and good dimensional stability. It exhibits good heat resistance and low-temperature resistance, and can be used long-term at -60~120℃. It has no obvious melting point and becomes molten at 220-230℃. Low water absorption, low shrinkage, high dimensional accuracy and good dimensional stability. Self-extinguishing, stable to light but not to UV light, with good weatherability. Resistant to oils and acids, but not to strong alkalis, oxidizing acids, amines and ketones. Soluble in chlorinated hydrocarbons and aromatic solvents; prolonged exposure to water may cause hydrolysis and cracking. This infrared-transmitting grade is designed with special molecular structure and additive formulation to allow infrared radiation to pass through, with slightly lower visible light transparency than ordinary PC while maintaining a certain transparency.
Uses:Infrared-transmitting PC is mainly used in housings for infrared sensing devices such as infrared remote controls and infrared sensors, without affecting the transmission and reception of infrared signals while protecting internal precision components. It is also used in optical detection and imaging equipment components, as well as infrared camera housings in security surveillance, ensuring clear infrared monitoring images at night.
Technical Specifications:
Infrared transmittance ≥85% at 950 nm wavelength
Visible light transmittance ≥70% for sufficient visibility
Density approx. 1.2 g/cm³, tensile strength ≥60 MPa
Notched impact strength ≥60 kJ/m² with good wear resistance
Long-term service temperature range from -60 to 120℃
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- 红外线穿透PC的 CAS 号是多少？
- 红外线穿透PC的 CAS 号是 None。
- 红外线穿透PC的分子式和分子量是什么？
- 红外线穿透PC的分子式为 (C16H14O3)n。
- 红外线穿透PC的英文名称是什么？
- 红外线穿透PC的英文名称为 Infrared-transmitting Polycarbonate (PC)。
- 红外线穿透PC还有哪些别名？
- 红外线穿透PC又称 红外穿透PC、红外透射聚碳酸酯、IR穿透PC。
- 红外线穿透PC有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条红外线穿透PC供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- 红外线穿透PC的供应商主要分布在哪些地区？
- 红外线穿透PC的供应商主要分布在 上海市（1 条） 等地。
- 红外线穿透PC有哪些级别可选？
- 平台上红外线穿透PC的供应级别包括 工业级。
- 红外线穿透PC的报价单位是什么？
- 红外线穿透PC的报价单位主要有 千克。
- 哪里可以查到红外线穿透PC的价格？
- 掌上化工红外线穿透PC产品页汇总了各供应商的最新报价与规格，地址：/chemicals/hong-wai-xian-chuan-tou-pc/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布红外线穿透PC采购需求
