耐高温PEEK特种工程塑料 (CAS No.None)
- 中文别名
- 聚醚醚酮；PEEK；聚醚醚酮树脂
- 英文名称
- Polyether Ether Ketone (PEEK)
- 分子式
- (C19H12O3)n
- 所属类别
- 塑料橡胶
- 物化性质
- 熔点334℃；玻璃化转变温度约143℃；负载热变形温度316℃；连续使用温度260℃。韧性与刚性兼备，耐交变应力疲劳性能优异，滑动特性出众，适合低摩擦系数和耐摩耗场合。耐化学药品性优异，耐腐蚀性与镍钢相近；阻燃性好，1.45mm厚样品不加阻燃剂即可达到阻燃标准。耐剥离性好，可制成极薄包覆电线或电磁线；耐γ辐照能力强，γ辐照剂量达1100Mrad时仍能保持良好绝缘性能。耐高温高压水蒸气，在高温高压水中连续使用仍能保持优异特性。
- 熔点
- 334℃
English description（英文原文，共 1849 字符）
Product Name:Polyether Ether Ketone (PEEK)
English Name:Polyether Ether Ketone (PEEK)
CAS No.:29658-26-2
Aliases:PEEK, Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene)
Molecular Formula:(C19H12O3)n
Physical Properties:Melting point: 334°C; glass transition temperature: approximately 143°C; heat deflection temperature under load: 316°C; continuous service temperature: 260°C. It combines toughness and rigidity, with excellent fatigue resistance to alternating stress. Outstanding sliding characteristics make it suitable for low-friction and wear-resistant applications. Excellent chemical resistance, with corrosion resistance comparable to nickel steel. Good flame retardancy: a 1.45 mm thick sample meets flame-retardant standards without flame retardant additives. Good peel resistance allows very thin coatings on wires or magnet wires. Strong resistance to gamma radiation: retains good insulating performance at a dose of 1100 Mrad. Unaffected by water and high-pressure steam; retains excellent properties under continuous use in high-temperature high-pressure water.
Uses:Widely used in high-tech industrial fields such as aerospace, machinery, electronics, chemical engineering, and automobiles. It can produce high-demand mechanical components such as gears, bearings, piston rings, support rings, sealing rings, valve plates, and wear rings. It is also suitable for wire and cable coatings, magnet wire, and other applications requiring high heat resistance, radiation resistance, and insulation.
Technical Specifications:
Melting point: 334°C
Heat deflection temperature under load: 316°C
Continuous service temperature: 260°C
Flame retardancy: a 1.45 mm thick sample meets flame-retardant standards without flame retardant additives
Gamma radiation resistance: retains good insulation at a dose of 1100 Mrad
English Name:Polyether Ether Ketone (PEEK)
CAS No.:29658-26-2
Aliases:PEEK, Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene)
Molecular Formula:(C19H12O3)n
Physical Properties:Melting point: 334°C; glass transition temperature: approximately 143°C; heat deflection temperature under load: 316°C; continuous service temperature: 260°C. It combines toughness and rigidity, with excellent fatigue resistance to alternating stress. Outstanding sliding characteristics make it suitable for low-friction and wear-resistant applications. Excellent chemical resistance, with corrosion resistance comparable to nickel steel. Good flame retardancy: a 1.45 mm thick sample meets flame-retardant standards without flame retardant additives. Good peel resistance allows very thin coatings on wires or magnet wires. Strong resistance to gamma radiation: retains good insulating performance at a dose of 1100 Mrad. Unaffected by water and high-pressure steam; retains excellent properties under continuous use in high-temperature high-pressure water.
Uses:Widely used in high-tech industrial fields such as aerospace, machinery, electronics, chemical engineering, and automobiles. It can produce high-demand mechanical components such as gears, bearings, piston rings, support rings, sealing rings, valve plates, and wear rings. It is also suitable for wire and cable coatings, magnet wire, and other applications requiring high heat resistance, radiation resistance, and insulation.
Technical Specifications:
Melting point: 334°C
Heat deflection temperature under load: 316°C
Continuous service temperature: 260°C
Flame retardancy: a 1.45 mm thick sample meets flame-retardant standards without flame retardant additives
Gamma radiation resistance: retains good insulation at a dose of 1100 Mrad
共 1 家生产厂家、批发商，
1 条供应报价
AI 解读这个产品
AI
AI 生成，仅供参考；价格与规格以供应商报价为准。
供应报价
常见问题
- 耐高温PEEK特种工程塑料的 CAS 号是多少？
- 耐高温PEEK特种工程塑料的 CAS 号是 None。
- 耐高温PEEK特种工程塑料的分子式和分子量是什么？
- 耐高温PEEK特种工程塑料的分子式为 (C19H12O3)n。
- 耐高温PEEK特种工程塑料的英文名称是什么？
- 耐高温PEEK特种工程塑料的英文名称为 Polyether Ether Ketone (PEEK)。
- 耐高温PEEK特种工程塑料还有哪些别名？
- 耐高温PEEK特种工程塑料又称 聚醚醚酮、PEEK、聚醚醚酮树脂。
- 耐高温PEEK特种工程塑料有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条耐高温PEEK特种工程塑料供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- 耐高温PEEK特种工程塑料的供应商主要分布在哪些地区？
- 耐高温PEEK特种工程塑料的供应商主要分布在 上海市（1 条） 等地。
- 耐高温PEEK特种工程塑料有哪些级别可选？
- 平台上耐高温PEEK特种工程塑料的供应级别包括 工业级。
- 耐高温PEEK特种工程塑料的报价单位是什么？
- 耐高温PEEK特种工程塑料的报价单位主要有 千克。
- 哪里可以查到耐高温PEEK特种工程塑料的价格？
- 掌上化工耐高温PEEK特种工程塑料产品页汇总了各供应商的最新报价与规格，地址：/chemicals/nai-gao-wen-peek-te-zhong-gong-cheng-su-liao/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布耐高温PEEK特种工程塑料采购需求
