耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料 (CAS No.None)
- 物化性质
- PA6为乳白色或微黄色半透明结晶聚合物，密度约1.14 g/cm³，熔点约220°C，工艺温度范围宽。该PF-1004牌号经PTFE类耐磨改性，耐老化、耐磨、耐化学性好，冲击韧性和耐溶剂性优于PA66，但吸湿性较强，饱和吸水率约9%。未增强时成型收缩率约1%~1.5%，加入玻璃纤维后收缩率可降至约0.3%。
- 技术参数
- 该牌号以PA6为基料，经PTFE耐磨改性，摩擦系数低、耐磨耗性能好。 密度约1.22 g/cm³，熔点约220°C，注塑熔体温度推荐240~250°C。 未增强时成型收缩率约1.0%~1.5%，玻璃纤维增强后约0.3%（垂直流动方向略高）。
English description（英文原文，共 1904 字符）
Product Name:Nylon 6 (PA6) PF-1004
English Name:Nylon 6 (PA6) PF-1004
CAS No.:25038-54-4
Aliases:Nylon 6, Polyamide 6, Polycaprolactam, PA6, PF-1004
Molecular Formula:(C6H11NO)n
Physical Properties:PA6 is a milky-white or slightly yellow translucent crystalline polymer with a density of about 1.14 g/cm³, a melting point of about 220°C, and a wide processing temperature range. This PF-1004 grade is modified with PTFE for wear resistance, offering good aging resistance, wear resistance and chemical resistance. It has better impact toughness and solvent resistance than PA66, but is more hygroscopic with a saturated water absorption of about 9%. Unfilled mold shrinkage is about 1% to 1.5%; adding glass fiber can reduce it to about 0.3%.
Uses:It is suitable for electronic and electrical components and mechanical structural parts requiring wear resistance, chemical resistance and dimensional stability. Typical applications include gears, bearings, sliders, spools, connectors, switches and automotive electrical housings. It can also be used in engineering plastic parts exposed to friction or chemicals that require long-term aging resistance.
Technical Specifications:
This grade is based on PA6 with PTFE wear-resistant modification, featuring low friction coefficient and excellent wear resistance.
Density is about 1.22 g/cm³, melting point is about 220°C, and recommended melt temperature for injection molding is 240-250°C.
Unfilled mold shrinkage is about 1.0%-1.5%; with glass fiber reinforcement it is about 0.3% (slightly higher in the transverse direction).
It is hygroscopic; dry before processing. If moisture is >0.2%, dry in hot air at above 80°C for 16 h; if exposed to air for more than 8 h, vacuum dry at 105°C for more than 8 h.
Chemical resistance is superior to PA66, with good resistance to oils, solvents, and weak acids/bases, plus long-term aging resistance.
English Name:Nylon 6 (PA6) PF-1004
CAS No.:25038-54-4
Aliases:Nylon 6, Polyamide 6, Polycaprolactam, PA6, PF-1004
Molecular Formula:(C6H11NO)n
Physical Properties:PA6 is a milky-white or slightly yellow translucent crystalline polymer with a density of about 1.14 g/cm³, a melting point of about 220°C, and a wide processing temperature range. This PF-1004 grade is modified with PTFE for wear resistance, offering good aging resistance, wear resistance and chemical resistance. It has better impact toughness and solvent resistance than PA66, but is more hygroscopic with a saturated water absorption of about 9%. Unfilled mold shrinkage is about 1% to 1.5%; adding glass fiber can reduce it to about 0.3%.
Uses:It is suitable for electronic and electrical components and mechanical structural parts requiring wear resistance, chemical resistance and dimensional stability. Typical applications include gears, bearings, sliders, spools, connectors, switches and automotive electrical housings. It can also be used in engineering plastic parts exposed to friction or chemicals that require long-term aging resistance.
Technical Specifications:
This grade is based on PA6 with PTFE wear-resistant modification, featuring low friction coefficient and excellent wear resistance.
Density is about 1.22 g/cm³, melting point is about 220°C, and recommended melt temperature for injection molding is 240-250°C.
Unfilled mold shrinkage is about 1.0%-1.5%; with glass fiber reinforcement it is about 0.3% (slightly higher in the transverse direction).
It is hygroscopic; dry before processing. If moisture is >0.2%, dry in hot air at above 80°C for 16 h; if exposed to air for more than 8 h, vacuum dry at 105°C for more than 8 h.
Chemical resistance is superior to PA66, with good resistance to oils, solvents, and weak acids/bases, plus long-term aging resistance.
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的 CAS 号是多少？
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的 CAS 号是 None。
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的分子式和分子量是什么？
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的分子式为 (C6H11NO)n。
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的英文名称是什么？
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的英文名称为 Nylon 6 (PA6) PF-1004。
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料还有哪些别名？
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料又称 尼龙6、聚酰胺6、聚己内酰胺、锦纶6、PF-1004。
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的供应商主要分布在哪些地区？
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的供应商主要分布在 上海市（1 条） 等地。
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料有哪些级别可选？
- 平台上耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的供应级别包括 工业级。
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的报价单位是什么？
- 耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的报价单位主要有 千克。
- 哪里可以查到耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料的价格？
- 掌上化工耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料产品页汇总了各供应商的最新报价与规格，地址：/chemicals/nai-lao-hua-pa6-ji-chu-chuang-xin-su-liao-mei-guo-pf-1004-nai-mo-nai-hua-xue-xing-ni-long-liao/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布耐老化PA6 基础创新塑料美国 PF-1004 耐磨 耐化学性尼龙料采购需求
