PA12/法国阿科玛/AESNO P20 TL挤出级耐高温 (CAS No.None)

Product Name:Polyamide 12 (PA12) Extrusion Grade High Heat Resistance

English Name:Polyamide 12 (PA12)

CAS No.:24937-16-4

Aliases:Nylon 12, Polylaurolactam, PA12, Polyamide 12

Molecular Formula:(C12H23NO)n

Physical Properties:PA12 is a linear semi-crystalline to crystalline thermoplastic material derived from butadiene, with a density of approximately 1.01-1.02 g/cm³ and a melting point of about 178-180°C. It has very low moisture regain (low water absorption), good flowability, and a shrinkage rate of 0.5% to 2% depending on material grade, wall thickness, and processing conditions. PA12 exhibits excellent impact resistance and chemical stability, serves as a good electrical insulator, and its insulating properties are not affected by humidity. However, it has no resistance to strongly oxidizing acids. Its viscosity mainly depends on humidity, temperature, and storage time.

Uses:Suitable for manufacturing water meters and other commercial equipment, cable sheathing, mechanical cams, sliding mechanisms, and bearings. This extrusion-grade high-heat-resistance grade is particularly suitable for extruded products requiring high temperature resistance.

Technical Specifications:

Density: 1.01-1.02 g/cm³

Melting point: 178-180°C

Shrinkage rate: 0.5%-2%

Low moisture regain and low water absorption

Extrusion grade, high heat resistance, good flowability