PA12瑞士EMS TR90 BK 挤出级 (CAS No.None)
- 中文别名
- 尼龙12；聚十二内酰胺；聚酰胺12；PA12 TR90 BK
- 英文名称
- PA12 Swiss EMS TR90 BK Extrusion Grade
- 分子式
- (C12H23NO)n
- 所属类别
- 塑料橡胶
- 物化性质
- 半结晶热塑性塑料，密度约1.01 g/cm³，熔点约178°C，吸水率低（约0.2%）。具有优良的耐磨损性、高体积稳定性、优异的噪音和振动阻尼性，对钢、POM、PBT等材料在干燥运转条件下滑动摩擦系数低，且兼具良好的耐化学性和低温韧性。
- 技术参数
- 加工前应保证含水率在0.1%以下；暴露于空气中储存的材料，建议在80°C下除湿干燥4~8小时；密闭容器中储存的材料经3小时温度平衡后可直接使用。 熔融温度为240~300℃。 普通特性材料的加工温度不应超过310℃。 阻燃特性材料的加工温度不应超过270℃。
English description（英文原文，共 1778 字符）
Product Name:PA12 Swiss EMS TR90 BK Extrusion Grade
English Name:PA12 Swiss EMS TR90 BK Extrusion Grade
CAS No.:24937-16-4
Aliases:Nylon 12, Polylaurolactam, Polyamide 12, PA12 TR90 BK
Molecular Formula:(C12H23NO)n
Physical Properties:Semi-crystalline thermoplastic with a density of approximately 1.01 g/cm³, a melting point of about 178°C and low water absorption (approximately 0.2%). It exhibits excellent wear resistance, high dimensional stability, outstanding noise and vibration damping, low sliding friction coefficient against steel, POM, PBT and other materials under dry running conditions, as well as good chemical resistance and low-temperature toughness.
Uses:Used for pipelines and connectors in media and compressed air systems in automotive, industrial products, sports and leisure goods, sanitary components (replacing brass), pneumatic tubes, cable and cable protection, high-quality electronic equipment housings, and household appliance components, as well as for water meters, cable sleeves, mechanical cams, sliding mechanisms, photovoltaic backsheets, and bearings. With its excellent noise and vibration damping properties, it is particularly suitable for quiet gears in DVD, CD, MD, VCR, camcorders, digital cameras, printers, and video recorders.
Technical Specifications:
Before processing, the moisture content should be kept below 0.1%; for materials stored in open air, dehumidifying drying at 80°C for 4–8 hours is recommended; materials stored in airtight containers can be used directly after 3 hours of temperature equilibration.
Melt temperature: 240–300°C.
The processing temperature should not exceed 310°C for materials with standard properties.
The processing temperature should not exceed 270°C for flame-retardant materials.
English Name:PA12 Swiss EMS TR90 BK Extrusion Grade
CAS No.:24937-16-4
Aliases:Nylon 12, Polylaurolactam, Polyamide 12, PA12 TR90 BK
Molecular Formula:(C12H23NO)n
Physical Properties:Semi-crystalline thermoplastic with a density of approximately 1.01 g/cm³, a melting point of about 178°C and low water absorption (approximately 0.2%). It exhibits excellent wear resistance, high dimensional stability, outstanding noise and vibration damping, low sliding friction coefficient against steel, POM, PBT and other materials under dry running conditions, as well as good chemical resistance and low-temperature toughness.
Uses:Used for pipelines and connectors in media and compressed air systems in automotive, industrial products, sports and leisure goods, sanitary components (replacing brass), pneumatic tubes, cable and cable protection, high-quality electronic equipment housings, and household appliance components, as well as for water meters, cable sleeves, mechanical cams, sliding mechanisms, photovoltaic backsheets, and bearings. With its excellent noise and vibration damping properties, it is particularly suitable for quiet gears in DVD, CD, MD, VCR, camcorders, digital cameras, printers, and video recorders.
Technical Specifications:
Before processing, the moisture content should be kept below 0.1%; for materials stored in open air, dehumidifying drying at 80°C for 4–8 hours is recommended; materials stored in airtight containers can be used directly after 3 hours of temperature equilibration.
Melt temperature: 240–300°C.
The processing temperature should not exceed 310°C for materials with standard properties.
The processing temperature should not exceed 270°C for flame-retardant materials.
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- PA12瑞士EMS TR90 BK 挤出级的 CAS 号是多少？
- PA12瑞士EMS TR90 BK 挤出级的 CAS 号是 None。
- PA12瑞士EMS TR90 BK 挤出级的分子式和分子量是什么？
- PA12瑞士EMS TR90 BK 挤出级的分子式为 (C12H23NO)n。
- PA12瑞士EMS TR90 BK 挤出级的英文名称是什么？
- PA12瑞士EMS TR90 BK 挤出级的英文名称为 PA12 Swiss EMS TR90 BK Extrusion Grade。
- PA12瑞士EMS TR90 BK 挤出级还有哪些别名？
- PA12瑞士EMS TR90 BK 挤出级又称 尼龙12、聚十二内酰胺、聚酰胺12、PA12 TR90 BK。
- PA12瑞士EMS TR90 BK 挤出级有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条PA12瑞士EMS TR90 BK 挤出级供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- PA12瑞士EMS TR90 BK 挤出级的供应商主要分布在哪些地区？
- PA12瑞士EMS TR90 BK 挤出级的供应商主要分布在 上海市（1 条） 等地。
- PA12瑞士EMS TR90 BK 挤出级有哪些级别可选？
- 平台上PA12瑞士EMS TR90 BK 挤出级的供应级别包括 工业级。
- PA12瑞士EMS TR90 BK 挤出级的报价单位是什么？
- PA12瑞士EMS TR90 BK 挤出级的报价单位主要有 千克。
- 哪里可以查到PA12瑞士EMS TR90 BK 挤出级的价格？
- 掌上化工PA12瑞士EMS TR90 BK 挤出级产品页汇总了各供应商的最新报价与规格，地址：/chemicals/pa12-rui-shi-ems-tr90-bk-ji-chu-ji/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布PA12瑞士EMS TR90 BK 挤出级采购需求
