PA6 73G30L NC010 润滑级 加30玻纤 (CAS No.None)
- 中文别名
- 尼龙6；聚酰胺6；锦纶6；PA6 73G30L NC010
- 英文名称
- PA6 73G30L NC010 Lubricated Grade with 30% Glass Fiber
- 分子式
- (C6H11NO)n
- 所属类别
- 塑料橡胶
- 物化性质
- 密度1.36 g/cm3；熔点较低，工艺温度范围宽；抗冲击性和抗溶解性优于PA66，但吸湿性更强。未增强PA6的收缩率约为1%-1.5%，加入玻璃纤维后可降至约0.3%（垂直流动方向略高）。
- 密度
- 1.36 g/cm3（ISO 1183）
English description（英文原文，共 1386 字符）
Product Name:PA6 73G30L NC010 Lubricated Grade with 30% Glass Fiber
English Name:PA6 73G30L NC010 Lubricated Grade with 30% Glass Fiber
CAS No.:25038-54-4
Aliases:Nylon 6, Polyamide 6, Caprolactam polymer, PA6 73G30L NC010
Molecular Formula:(C6H11NO)n
Physical Properties:Density 1.36 g/cm3; relatively low melting point with wide processing temperature range; better impact resistance and solvent resistance than PA66 but higher moisture absorption. Unreinforced PA6 has a shrinkage of about 1%-1.5%; with glass fiber reinforcement, shrinkage is reduced to about 0.3% (slightly higher in the transverse direction).
Uses:Used to manufacture bearings, gears, pulleys, fan blades, screws, nuts, gaskets, high-pressure seals, oil-resistant sealing washers, housings, hoses, cable sheaths and other mechanical parts. Widely used in automotive interior and exterior components. This glass-fiber reinforced material offers high strength, good heat resistance, excellent impact resistance, good dimensional stability and low warpage.
Technical Specifications:
Density: 1.36 g/cm3 (ISO 1183)
Water absorption: 6.3% after 24 hr at 23°C, 2.00 mm; 1.9% at equilibrium (23°C, 50% RH) (ISO 62)
Viscosity number: 150 cm3/g (ISO 307)
Mold shrinkage: 0.20% in flow direction, 0.60% transverse to flow direction (ISO 294-4)
Tensile modulus: 9800 MPa (dry), 6000 MPa (conditioned) (ISO 527-2)
English Name:PA6 73G30L NC010 Lubricated Grade with 30% Glass Fiber
CAS No.:25038-54-4
Aliases:Nylon 6, Polyamide 6, Caprolactam polymer, PA6 73G30L NC010
Molecular Formula:(C6H11NO)n
Physical Properties:Density 1.36 g/cm3; relatively low melting point with wide processing temperature range; better impact resistance and solvent resistance than PA66 but higher moisture absorption. Unreinforced PA6 has a shrinkage of about 1%-1.5%; with glass fiber reinforcement, shrinkage is reduced to about 0.3% (slightly higher in the transverse direction).
Uses:Used to manufacture bearings, gears, pulleys, fan blades, screws, nuts, gaskets, high-pressure seals, oil-resistant sealing washers, housings, hoses, cable sheaths and other mechanical parts. Widely used in automotive interior and exterior components. This glass-fiber reinforced material offers high strength, good heat resistance, excellent impact resistance, good dimensional stability and low warpage.
Technical Specifications:
Density: 1.36 g/cm3 (ISO 1183)
Water absorption: 6.3% after 24 hr at 23°C, 2.00 mm; 1.9% at equilibrium (23°C, 50% RH) (ISO 62)
Viscosity number: 150 cm3/g (ISO 307)
Mold shrinkage: 0.20% in flow direction, 0.60% transverse to flow direction (ISO 294-4)
Tensile modulus: 9800 MPa (dry), 6000 MPa (conditioned) (ISO 527-2)
共 1 家生产厂家、批发商，
1 条供应报价
AI 解读这个产品
AI
AI 生成，仅供参考；价格与规格以供应商报价为准。
供应报价
常见问题
- PA6 73G30L NC010 润滑级 加30玻纤的 CAS 号是多少？
- PA6 73G30L NC010 润滑级 加30玻纤的 CAS 号是 None。
- PA6 73G30L NC010 润滑级 加30玻纤的分子式和分子量是什么？
- PA6 73G30L NC010 润滑级 加30玻纤的分子式为 (C6H11NO)n。
- PA6 73G30L NC010 润滑级 加30玻纤的英文名称是什么？
- PA6 73G30L NC010 润滑级 加30玻纤的英文名称为 PA6 73G30L NC010 Lubricated Grade with 30% Glass Fiber。
- PA6 73G30L NC010 润滑级 加30玻纤还有哪些别名？
- PA6 73G30L NC010 润滑级 加30玻纤又称 尼龙6、聚酰胺6、锦纶6、PA6 73G30L NC010。
- PA6 73G30L NC010 润滑级 加30玻纤有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条PA6 73G30L NC010 润滑级 加30玻纤供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- PA6 73G30L NC010 润滑级 加30玻纤的供应商主要分布在哪些地区？
- PA6 73G30L NC010 润滑级 加30玻纤的供应商主要分布在 上海市（1 条） 等地。
- PA6 73G30L NC010 润滑级 加30玻纤有哪些级别可选？
- 平台上PA6 73G30L NC010 润滑级 加30玻纤的供应级别包括 工业级。
- PA6 73G30L NC010 润滑级 加30玻纤的报价单位是什么？
- PA6 73G30L NC010 润滑级 加30玻纤的报价单位主要有 千克。
- 哪里可以查到PA6 73G30L NC010 润滑级 加30玻纤的价格？
- 掌上化工PA6 73G30L NC010 润滑级 加30玻纤产品页汇总了各供应商的最新报价与规格，地址：/chemicals/pa6-73g30l-nc010-run-hua-ji-jia-30-bo-xian/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布PA6 73G30L NC010 润滑级 加30玻纤采购需求
