PC 高粘度 紫外线稳定 连接器 汽车领域 (CAS No.None)
- 中文别名
- 聚碳酸酯树脂；PC塑料；双酚A型聚碳酸酯；高粘度PC
- 英文名称
- Polycarbonate (PC) High Viscosity UV Stabilized
- 分子式
- (C16H14O3)n
- 所属类别
- 塑料橡胶
- 物化性质
- 高粘度紫外线稳定聚碳酸酯为无定形热塑性工程塑料。密度约1.2 g/cm³，透光率最高可达89%。抗冲击性能优异，冲击强度为普通玻璃的250-300倍，比重仅约为玻璃的一半。阻燃等级为难燃一级（B1级），燃点580℃，离火自熄，燃烧时不产生有毒气体。具有优异的抗紫外线性能，长期户外暴露不易黄变。可冷弯或热弯，最小弯曲半径为板厚的175倍；隔音效果比等厚玻璃提高3-4分贝，隔热性能高出7%-25%。高粘度牌号熔体流动性较低，制品内应力小，尺寸稳定性好。
- 技术参数
- 密度约1.2 g/cm³，比重仅为玻璃的一半。 透光率最高可达89%，经抗紫外线涂层处理后户外十年透光流失仅6%。 抗冲击强度为普通玻璃的250-300倍，同等厚度亚克力板的30倍，钢化玻璃的2-20倍。 阻燃等级为难燃一级（B1级），燃点580℃，离火自熄。 可冷弯或热弯，最小弯曲半径为板厚的175倍。
English description（英文原文，共 2158 字符）
Product Name:Polycarbonate (PC) High Viscosity UV Stabilized
English Name:Polycarbonate (PC) High Viscosity UV Stabilized
CAS No.:25037-45-0
Aliases:Polycarbonate resin, PC plastic, Bisphenol A polycarbonate, High viscosity PC
Molecular Formula:(C16H14O3)n
Physical Properties:High-viscosity UV-stabilized polycarbonate is an amorphous thermoplastic engineering plastic. It has a density of approximately 1.2 g/cm³ and a light transmittance of up to 89%. Its impact resistance is excellent, with impact strength 250-300 times that of ordinary glass, and specific gravity only about half that of glass. It has a flame retardant rating of B1 (difficult to ignite), an ignition point of 580°C, self-extinguishes after removal from flame, and produces no toxic gases during combustion. It exhibits excellent UV resistance and is not prone to yellowing under prolonged outdoor exposure. It can be cold-bent or hot-bent with a minimum bending radius of 175 times the sheet thickness; sound insulation is 3-4 dB higher than glass of the same thickness, and thermal insulation performance is 7%-25% higher. The high-viscosity grade has lower melt flow, resulting in lower internal stress in products and good dimensional stability.
Uses:Used in connectors and automotive applications, such as headlamp housings, instrument panels, connectors and electronic connectors. With excellent impact resistance, heat resistance and weatherability, it meets the engineering requirements of the automotive and electronics industries for complex structural parts and long-term outdoor service.
Technical Specifications:
Density: approx. 1.2 g/cm³; specific gravity is only half of glass.
Light transmittance: up to 89%; with UV coating, light transmission loss is only 6% after ten years of outdoor exposure.
Impact strength: 250-300 times that of ordinary glass, 30 times that of acrylic sheet of equal thickness, and 2-20 times that of tempered glass.
Flame retardancy: B1 grade (difficult to ignite), ignition point 580°C, self-extinguishing after removal from flame.
Bending: can be cold-bent or hot-bent; minimum bending radius is 175 times the sheet thickness.
English Name:Polycarbonate (PC) High Viscosity UV Stabilized
CAS No.:25037-45-0
Aliases:Polycarbonate resin, PC plastic, Bisphenol A polycarbonate, High viscosity PC
Molecular Formula:(C16H14O3)n
Physical Properties:High-viscosity UV-stabilized polycarbonate is an amorphous thermoplastic engineering plastic. It has a density of approximately 1.2 g/cm³ and a light transmittance of up to 89%. Its impact resistance is excellent, with impact strength 250-300 times that of ordinary glass, and specific gravity only about half that of glass. It has a flame retardant rating of B1 (difficult to ignite), an ignition point of 580°C, self-extinguishes after removal from flame, and produces no toxic gases during combustion. It exhibits excellent UV resistance and is not prone to yellowing under prolonged outdoor exposure. It can be cold-bent or hot-bent with a minimum bending radius of 175 times the sheet thickness; sound insulation is 3-4 dB higher than glass of the same thickness, and thermal insulation performance is 7%-25% higher. The high-viscosity grade has lower melt flow, resulting in lower internal stress in products and good dimensional stability.
Uses:Used in connectors and automotive applications, such as headlamp housings, instrument panels, connectors and electronic connectors. With excellent impact resistance, heat resistance and weatherability, it meets the engineering requirements of the automotive and electronics industries for complex structural parts and long-term outdoor service.
Technical Specifications:
Density: approx. 1.2 g/cm³; specific gravity is only half of glass.
Light transmittance: up to 89%; with UV coating, light transmission loss is only 6% after ten years of outdoor exposure.
Impact strength: 250-300 times that of ordinary glass, 30 times that of acrylic sheet of equal thickness, and 2-20 times that of tempered glass.
Flame retardancy: B1 grade (difficult to ignite), ignition point 580°C, self-extinguishing after removal from flame.
Bending: can be cold-bent or hot-bent; minimum bending radius is 175 times the sheet thickness.
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
共有 1 家生产厂家、批发商，
1 条供应报价
，覆盖 1 个省份
掌上化工科技有限公司
执照已核验
| 产品名称 | 纯度 | 包装规格 | 级别 | 价格 | 库存 | 操作 |
|---|---|---|---|---|---|---|
| PC 高粘度 紫外线稳定 连接器 汽车领域 | — | — | 工业级 | 电议 | — | 询价 |
目前只有 1 家供应商报价
发布采购需求，让更多供应商主动联系你报价。
发布采购需求
AI 解读这个产品
AI
AI 生成，仅供参考；价格与规格以供应商报价为准。
常见问题
- PC 高粘度 紫外线稳定 连接器 汽车领域的 CAS 号是多少？
- PC 高粘度 紫外线稳定 连接器 汽车领域的 CAS 号是 None。
- PC 高粘度 紫外线稳定 连接器 汽车领域的分子式和分子量是什么？
- PC 高粘度 紫外线稳定 连接器 汽车领域的分子式为 (C16H14O3)n。
- PC 高粘度 紫外线稳定 连接器 汽车领域的英文名称是什么？
- PC 高粘度 紫外线稳定 连接器 汽车领域的英文名称为 Polycarbonate (PC) High Viscosity UV Stabilized。
展开其余 6 条问答
- PC 高粘度 紫外线稳定 连接器 汽车领域还有哪些别名？
- PC 高粘度 紫外线稳定 连接器 汽车领域又称 聚碳酸酯树脂、PC塑料、双酚A型聚碳酸酯、高粘度PC。
- PC 高粘度 紫外线稳定 连接器 汽车领域有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条PC 高粘度 紫外线稳定 连接器 汽车领域供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- PC 高粘度 紫外线稳定 连接器 汽车领域的供应商主要分布在哪些地区？
- PC 高粘度 紫外线稳定 连接器 汽车领域的供应商主要分布在 上海市（1 条） 等地。
- PC 高粘度 紫外线稳定 连接器 汽车领域有哪些级别可选？
- 平台上PC 高粘度 紫外线稳定 连接器 汽车领域的供应级别包括 工业级。
- PC 高粘度 紫外线稳定 连接器 汽车领域的报价单位是什么？
- PC 高粘度 紫外线稳定 连接器 汽车领域的报价单位主要有 千克。
- 哪里可以查到PC 高粘度 紫外线稳定 连接器 汽车领域的价格？
- 掌上化工PC 高粘度 紫外线稳定 连接器 汽车领域产品页汇总了各供应商的最新报价与规格，地址：/chemicals/pc-gao-zhan-du-zi-wai-xian-wen-ding-lian-jie-qi-qi-che-ling-yu/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布PC 高粘度 紫外线稳定 连接器 汽车领域采购需求
