PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料 (CAS No.None)
- 中文别名
- 聚醚醚酮；PEEK树脂；玻纤增强聚醚醚酮；碳纤增强聚醚醚酮；PTFE改性PEEK
- 英文名称
- PEEK Glass Fiber / Carbon Fiber / PTFE Reinforced Engineering Plastic
- 分子式
- (C19H12O3)n
- 所属类别
- 塑料橡胶
- 物化性质
- PEEK（聚醚醚酮）是一种半结晶性耐高温热塑性工程塑料，兼具韧性和刚性，尺寸稳定性好。耐高温性能优异，长期使用温度160°C以上，增强级可达250°C以上，短时使用可至315°C；不添加阻燃剂即可达UL94 V-0级；耐辐照（10^9拉德）、耐水解、耐化学腐蚀，在高温高压下仍能保持优异特性；兼具轻量、耐磨、抗静电和良好的电绝缘性，燃烧时低烟尘和低毒气排放。
- 技术参数
- 长期使用温度160°C以上，增强级可达250°C以上，短时使用最高315°C。 阻燃等级UL94 V-0，无需添加阻燃剂。 耐辐照性能达10^9拉德，耐水解、耐化学腐蚀。 典型熔融温度约343°C，玻璃化转变温度约143°C，结晶型半结晶结构。 表面电阻率高，耐磨、抗静电，电绝缘性能良好。
English description（英文原文，共 2191 字符）
Product Name:PEEK Glass Fiber / Carbon Fiber / PTFE Reinforced Engineering Plastic
English Name:PEEK Glass Fiber / Carbon Fiber / PTFE Reinforced Engineering Plastic
CAS No.:29658-26-2
Aliases:Polyetheretherketone, PEEK resin, Glass-fiber reinforced PEEK, Carbon-fiber reinforced PEEK, PTFE-modified PEEK
Molecular Formula:(C19H12O3)n
Physical Properties:PEEK is a semi-crystalline high-temperature thermoplastic engineering plastic with excellent toughness, rigidity and dimensional stability. It offers outstanding high-temperature performance, with long-term service temperature above 160°C for unreinforced grades and above 250°C for reinforced grades, and short-term use up to 315°C. It achieves UL94 V-0 flame retardant rating without any additives; is resistant to radiation (10^9 rad), hydrolysis and chemical corrosion, maintaining excellent properties under high temperature and high pressure. It is lightweight, wear-resistant, antistatic, and has good electrical insulation, with low smoke and toxic gas emission during combustion.
Uses:PEEK engineering plastics are widely used in the automotive (including aviation) transportation industry, accounting for about 50% of consumption, for engine peripheral parts, transmission components and steering parts to replace metal and achieve lightweighting. In semiconductor manufacturing equipment, they account for 20% and meet stringent requirements such as low dust, low gas release, low ion elution and low water absorption. The remaining applications include general mechanical parts, copier components, wire coating, sheets/rods, industrial filter cloths and brushes, and medical devices such as artificial bone due to good biocompatibility.
Technical Specifications:
Long-term service temperature above 160°C; reinforced grades above 250°C; short-term maximum up to 315°C.
UL94 V-0 flame retardant rating without flame retardant additives.
Radiation resistance up to 10^9 rad; resistant to hydrolysis and chemical corrosion.
Typical melting point about 343°C; glass transition temperature about 143°C; semi-crystalline structure.
High surface resistivity; wear-resistant, antistatic, with good electrical insulation.
English Name:PEEK Glass Fiber / Carbon Fiber / PTFE Reinforced Engineering Plastic
CAS No.:29658-26-2
Aliases:Polyetheretherketone, PEEK resin, Glass-fiber reinforced PEEK, Carbon-fiber reinforced PEEK, PTFE-modified PEEK
Molecular Formula:(C19H12O3)n
Physical Properties:PEEK is a semi-crystalline high-temperature thermoplastic engineering plastic with excellent toughness, rigidity and dimensional stability. It offers outstanding high-temperature performance, with long-term service temperature above 160°C for unreinforced grades and above 250°C for reinforced grades, and short-term use up to 315°C. It achieves UL94 V-0 flame retardant rating without any additives; is resistant to radiation (10^9 rad), hydrolysis and chemical corrosion, maintaining excellent properties under high temperature and high pressure. It is lightweight, wear-resistant, antistatic, and has good electrical insulation, with low smoke and toxic gas emission during combustion.
Uses:PEEK engineering plastics are widely used in the automotive (including aviation) transportation industry, accounting for about 50% of consumption, for engine peripheral parts, transmission components and steering parts to replace metal and achieve lightweighting. In semiconductor manufacturing equipment, they account for 20% and meet stringent requirements such as low dust, low gas release, low ion elution and low water absorption. The remaining applications include general mechanical parts, copier components, wire coating, sheets/rods, industrial filter cloths and brushes, and medical devices such as artificial bone due to good biocompatibility.
Technical Specifications:
Long-term service temperature above 160°C; reinforced grades above 250°C; short-term maximum up to 315°C.
UL94 V-0 flame retardant rating without flame retardant additives.
Radiation resistance up to 10^9 rad; resistant to hydrolysis and chemical corrosion.
Typical melting point about 343°C; glass transition temperature about 143°C; semi-crystalline structure.
High surface resistivity; wear-resistant, antistatic, with good electrical insulation.
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的 CAS 号是多少？
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的 CAS 号是 None。
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的分子式和分子量是什么？
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的分子式为 (C19H12O3)n。
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的英文名称是什么？
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的英文名称为 PEEK Glass Fiber / Carbon Fiber / PTFE Reinforced Engineering Plastic。
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料还有哪些别名？
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料又称 聚醚醚酮、PEEK树脂、玻纤增强聚醚醚酮、碳纤增强聚醚醚酮、PTFE改性PEEK。
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的供应商主要分布在哪些地区？
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的供应商主要分布在 上海市（1 条） 等地。
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料有哪些级别可选？
- 平台上PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的供应级别包括 工业级。
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的报价单位是什么？
- PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的报价单位主要有 千克。
- 哪里可以查到PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料的价格？
- 掌上化工PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料产品页汇总了各供应商的最新报价与规格，地址：/chemicals/peek-bo-xian-zeng-qiang-tan-xian-30-tie-fu-long-zeng-qiang-ge-xing-neng-gong-cheng-su-liao/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布PEEK 玻纤增强 碳纤30 铁氟龙增强 各性能工程塑料采购需求
