Ultraform 低挥发POM N2320 U035 LEV AT (CAS No.None)
- 物化性质
- 白色至淡黄色颗粒，密度约1.41 g/cm³，熔融温度约165–175 °C，无明确沸点，受热高于230 °C开始分解，闪点不适用。具有高刚性、高模量、良好的回弹性和优异的耐化学药品性能，摩擦系数低，吸水率低，耐蠕变性好，尺寸稳定性高。不溶于普通有机溶剂，耐多数溶剂和油类，但遇强酸、强氧化剂会发生降解。
- 技术参数
- 密度（ISO 1183）约1.41 g/cm³，比重适中，具有良好刚性和尺寸稳定性。 熔融温度约165–175 °C，可在约190–230 °C的常规加工温度范围内进行注塑或挤出成型。
English description（英文原文，共 2068 字符）
Product Name:Ultraform N2320 U035 LEV AT
English Name:Ultraform N2320 U035 LEV AT
CAS No.:9002-81-7
Aliases:Polyoxymethylene, Acetal resin, POM, Polyformaldehyde
Molecular Formula:(CH2O)n
Physical Properties:White to light yellow pellets, with a density of approximately 1.41 g/cm³, melting temperature of approximately 165–175 °C, no defined boiling point, and decomposition beginning above 230 °C; flash point is not applicable. It features high rigidity, high modulus, good resilience, and excellent chemical resistance, along with low friction coefficient, low water absorption, excellent creep resistance, and high dimensional stability. It is insoluble in common organic solvents and resistant to most solvents and oils, but it degrades when exposed to strong acids and strong oxidizers.
Uses:Ultraform N2320 U035 LEV AT low-emission POM is suitable for injection-molded components with strict volatile and odor requirements in automobile manufacturing, equipment and machinery construction, such as automotive interior parts, gears, bearings, clips, connectors, and precision structural parts. The material can meet high-load component performance requirements and is suitable for economical mass production of complex injection-molded parts.
Technical Specifications:
Density (ISO 1183) is approximately 1.41 g/cm³, providing good rigidity and dimensional stability.
Melting temperature is approximately 165–175 °C, and conventional processing temperature ranges from about 190–230 °C for injection molding or extrusion.
Low-emission performance: low volatile organic compound emissions and low odor level, particularly suitable for automotive interiors and other applications with strict odor and VOC requirements.
Mechanical properties: high rigidity and high modulus, with tensile modulus of approximately 2800–3200 MPa, excellent creep resistance and resilience.
Chemical resistance: resistant to many solvents, oils, and dilute acids/alkalis, with low water absorption; however, it is not resistant to strong acids and strong oxidizing agents.
English Name:Ultraform N2320 U035 LEV AT
CAS No.:9002-81-7
Aliases:Polyoxymethylene, Acetal resin, POM, Polyformaldehyde
Molecular Formula:(CH2O)n
Physical Properties:White to light yellow pellets, with a density of approximately 1.41 g/cm³, melting temperature of approximately 165–175 °C, no defined boiling point, and decomposition beginning above 230 °C; flash point is not applicable. It features high rigidity, high modulus, good resilience, and excellent chemical resistance, along with low friction coefficient, low water absorption, excellent creep resistance, and high dimensional stability. It is insoluble in common organic solvents and resistant to most solvents and oils, but it degrades when exposed to strong acids and strong oxidizers.
Uses:Ultraform N2320 U035 LEV AT low-emission POM is suitable for injection-molded components with strict volatile and odor requirements in automobile manufacturing, equipment and machinery construction, such as automotive interior parts, gears, bearings, clips, connectors, and precision structural parts. The material can meet high-load component performance requirements and is suitable for economical mass production of complex injection-molded parts.
Technical Specifications:
Density (ISO 1183) is approximately 1.41 g/cm³, providing good rigidity and dimensional stability.
Melting temperature is approximately 165–175 °C, and conventional processing temperature ranges from about 190–230 °C for injection molding or extrusion.
Low-emission performance: low volatile organic compound emissions and low odor level, particularly suitable for automotive interiors and other applications with strict odor and VOC requirements.
Mechanical properties: high rigidity and high modulus, with tensile modulus of approximately 2800–3200 MPa, excellent creep resistance and resilience.
Chemical resistance: resistant to many solvents, oils, and dilute acids/alkalis, with low water absorption; however, it is not resistant to strong acids and strong oxidizing agents.
共 1 家生产厂家、批发商，
1 条供应报价
供应报价
常见问题
- Ultraform 低挥发POM N2320 U035 LEV AT的 CAS 号是多少？
- Ultraform 低挥发POM N2320 U035 LEV AT的 CAS 号是 None。
- Ultraform 低挥发POM N2320 U035 LEV AT的分子式和分子量是什么？
- Ultraform 低挥发POM N2320 U035 LEV AT的分子式为 (CH2O)n。
- Ultraform 低挥发POM N2320 U035 LEV AT的英文名称是什么？
- Ultraform 低挥发POM N2320 U035 LEV AT的英文名称为 Ultraform N2320 U035 LEV AT。
- Ultraform 低挥发POM N2320 U035 LEV AT还有哪些别名？
- Ultraform 低挥发POM N2320 U035 LEV AT又称 聚甲醛、聚氧亚甲基、共聚甲醛、缩醛树脂、POM。
- Ultraform 低挥发POM N2320 U035 LEV AT有哪些供应商和生产厂家？
- 掌上化工当前收录 1 条Ultraform 低挥发POM N2320 U035 LEV AT供应报价，来自 1 家供应商，可按地区、纯度、级别筛选对比。
- Ultraform 低挥发POM N2320 U035 LEV AT的供应商主要分布在哪些地区？
- Ultraform 低挥发POM N2320 U035 LEV AT的供应商主要分布在 上海市（1 条） 等地。
- Ultraform 低挥发POM N2320 U035 LEV AT有哪些级别可选？
- 平台上Ultraform 低挥发POM N2320 U035 LEV AT的供应级别包括 工业级。
- Ultraform 低挥发POM N2320 U035 LEV AT的报价单位是什么？
- Ultraform 低挥发POM N2320 U035 LEV AT的报价单位主要有 千克。
- 哪里可以查到Ultraform 低挥发POM N2320 U035 LEV AT的价格？
- 掌上化工Ultraform 低挥发POM N2320 U035 LEV AT产品页汇总了各供应商的最新报价与规格，地址：/chemicals/ultraform-di-hui-fa-pom-n2320-u035-lev-at/。部分供应商价格为电议，可通过页面上的询价功能直接获取。
以上信息由平台根据收录的产品数据自动生成，数据更新时间 。 价格与库存由供应商自行发布，实际交易请以询价结果为准。
没找到合适的供应商？
发布采购需求，让供应商主动联系你。我们会在 1 个工作日内跟进。
发布Ultraform 低挥发POM N2320 U035 LEV AT采购需求
